Repository navigation
Description
Mac and installed build
Model / board / SoC: MacBook Pro 14-inch M3, Nov 2023 / apple,j504 / apple,t8122
Installed Aurora tag / uname -r: unavailable right now, will add in a comment
Bootloader and packages: linux-aurora 7.2.11.aurora14-1, m1n1-aurora 1.6.1.aurora22-1, uboot-aurora 2026.07.aurora6-1
Distribution / local patches: Omarchy (Hyprland), no local patches
Both firmware versions and provisioning
asahi,os-fw-version: unavailable right now, will add in a comment
asahi,system-fw-version: unavailable right now, will add in a comment
Reproduction, expected result, and actual result
- Connect a Dell monitor to a USB-C port on the Mac through a USB-C-to-HDMI adapter and an HDMI-to-HDMI cable.
- Boot Aurora and log in to Hyprland.
Expected: the monitor shows up as a second output.
Actual: the monitor gets no signal. Linux has no connector for it: only the internal panel exists, on the simple-framebuffer card. This happens on every boot.
Relevant error lines
$ ls /sys/class/drm/
card0 card0-Unknown-1 version # card0 = simple-framebuffer, internal panel only
$ hyprctl monitors all
Unknown-1 | 3024x1890@60 | disabled=false
/proc/device-tree/soc/dcp@28ec00000: disabled
/proc/device-tree/soc/dcp@31ac00000: disabled
/proc/device-tree/display-subsystem: disabled
apple-t8122-display: /soc/dcp@31ac00000 left disabled: the internal display was not handed over
appledrm is installed in /lib/modules, and its aliases include apple,t8122-display-subsystem, but it doesn't bind, because the DCP nodes are disabled.
Related issues, pull requests, or code examples
- [j504] (MacBook Pro 14-inch M3, Nov 2023): test results #382: J504 test results (same DCP log; external displays not tested there).
- J504: drive the 14" M3 MacBook Pro's display and GPU by default #388 and kboot: give the J504 the T8122 display and GPU defaults m1n1#25: J504 internal display and GPU. That PR says external displays and the HDMI port aren't included.
- j613 (MacBook Air M3): external DisplayPort over USB-C on both ports (dcpext), with patches #103: external DisplayPort over USB-C on the J613 (MacBook Air M3). It's the same T8122 chip, and it works there with a 12-patch series.
- j615: external DisplayPort over USB-C (dcpext), with fbdma framebuffer mirror #356 and drm: apple: dcp-fabric: give an idle port's pipeline to a waiting display #357: J615 dcpext and idle-port pipeline handover (drm: apple: dcp-fabric: give an idle port's pipeline to a waiting display #357 is also noted as relevant to J613).
- M3 Max (J516C): external displays over USB-C and HDMI #292: external displays over USB-C and HDMI on M3 Max (J516C).
Is external display support on the J504, over USB-C DP alt mode and/or the built-in HDMI port, planned after #388? Could the #103 series and #357 be applied to the J504 device tree once #388 lands, or does it depend on anything else? I'd like to follow one issue for it. I can test opt-in or edge builds on this J504 and send the install-aurora-sep.sh --m3-report output or any other report you need.
What was not tested
- The built-in HDMI port.
- A direct USB-C/DisplayPort cable without an adapter.
- Other monitors, or a dock.
- Hot-plugging after boot compared with connecting before boot.
- Any build from J504: drive the 14" M3 MacBook Pro's display and GPU by default #388, the j613 (MacBook Air M3): external DisplayPort over USB-C on both ports (dcpext), with patches #103 patch series, or other opt-in builds.
Activity
Daksh-Pareek commentedon Nov 10, 2026
@scottjones @maralcbr @GehrmannSolutions Any update on external-display support for J504 now that #388 and the related T8122 USB-C DisplayPort work have progressed? Has the J504 handoff fix shipped, and could the T8122 external-display changes be tested on J504? I’m happy to test a build and share results.
GehrmannSolutions commentedon Nov 12, 2026
I can only speak for the 13" Air (J613), since I don't have a J504.
On J613, external DisplayPort over USB-C now works by default with
linux-aurora 7.2.11.aurora16-1+m1n1-aurora 1.6.1.aurora23-2. Both are in the edge channel for now (omacom/omarchy-pkgs#2424, #2425); stable and rc are still on aurora14/aurora22. Details are in #103.For the J504, #2425 lists the display and GPU defaults (omacom/m1n1#25). Since the T8122 dcpext work is shared, I'd expect the edge pair to be the build worth testing on your board.
Two things to know before you try it:
m1n1-auroraaurora23 refuses kernels older than aurora16 (#2435). Take a snapshot first, because going back means restoring the snapshot, not downgrading one package.Disclosure: written with an AI coding agent (Claude Code), based on tests on my J613.