Skip to content
martin2250Public

About

touch sensing library for Arduino

Resources

Stars

115 stars

Watchers

11 watching

Forks

Latest commit

 

History

23 Commits

Folders and files

Repository files navigation

ADCTouch

ADCTouch is a library that allows users to create a capacitive sensor without ANY external hardware.

Purpose

Most capacitive touch libraries require two pins and a large resistor to acquire precise readings. This library makes use of the AVRs internal wiring to get decent resolution with just a single pin.

Usage

int val = ADCTouch.read(byte analogChannel, int samples = 100);

  • analogChannel: the pin to use, you can just use A0 - A5
  • samples: (optional) the amount of samples to take, defaults to 100
    ...range 1 - 65535 ...(value does not change with different amounts of samples)

How it works

To Acquire a reading, the library does the following:

  • charge the test pin to 5V via pullup resistor (not directly to prevent short circuits)
  • discharge the internal ~14pF capacitor
  • set the pin to tristate
  • connect the 14pF capacitor with the pin so that charge distributes evenly
  • measure the voltage of the internal cap with analogRead()
    ...if the pin has a low capacitance, the stored charge will be small as will the resulting voltage, if the external capacitance is equal to 14pF, the volatage should be ~2.5V. Even higher capacitances will result in volatges > 2.5V. The chip and arduino board already have stray capacitances that will produce an output of ~390 and just a single external wire can boost that up to 500, so you really need offset compensation.

The accuracy is really good, most often even the LSB/smalles digit can still yield usable data and just vary by a single unit between readings (at only 100 samples, more will mean even less variation). The sensitivity is phenomenal, with a large enough surface, it can sense a person in more than 2 feet distance.

A more accurate explanation can be found here (the domain is no longer active -> archive link)

About

touch sensing library for Arduino

Resources

Stars

115 stars

Watchers

11 watching

Forks

Releases

Packages

Contributors

Languages