Add more info to Nokia G-010S-P

ont/ont-fs-com-gpon-onu-stick-with-mac.md

@@ -93,7 +93,7 @@ mtd4 --> rootfs
 mtd5 --> rootfs_data
 ```
 
-For more info [XPONos partition layout](https://github.com/XPONos/linux_lantiq-falcon/commit/456f68f69a84c846a542a9f0ea47c37476535dcb).
+For more info [XPONos partition layout](https://web.archive.org/web/20240925035217/https://github.com/XPONos/linux_lantiq-falcon/commit/456f68f69a84c846a542a9f0ea47c37476535dcb).
 
 ### When booting from image0
 

ont/ont-huawei-ma5671a.md

@@ -85,7 +85,7 @@ mtd4 --> rootfs
 mtd5 --> rootfs_data
 ```
 
-For more info [XPONos partition layout](https://github.com/XPONos/linux_lantiq-falcon/commit/456f68f69a84c846a542a9f0ea47c37476535dcb).
+For more info [XPONos partition layout](https://web.archive.org/web/20240925035217/https://github.com/XPONos/linux_lantiq-falcon/commit/456f68f69a84c846a542a9f0ea47c37476535dcb).
 
 
 ### When booting from image0

ont/ont-nokia-g-010s-p.md

@@ -11,7 +11,7 @@ parent: Nokia
 | Vendor/Brand     | Nokia                                    |
 | Model            | G-010S-P                                 |
 | ODM              | SourcePhotonics                          |
-| ODM Product Code |                                          |
+| ODM Product Code | SPS-34-24T-HP-TDFO                       |
 | Chipset          | Lantiq PEB98035                          |
 | Flash            | 16 MB                                    |
 | RAM              | 64 MB                                    |
@@ -20,7 +20,7 @@ parent: Nokia
 | System           | OpenWRT                                  |
 | HSGMII           | Yes                                      |
 | Optics           | SC/APC                                   |
-| IP address       |                                          |
+| IP address       | 192.168.1.10                             |
 | Web Gui          | Can be enabled                           |
 | SSH              | ✅ user `ONTUSER`, password `SUGAR2A041` |
 | Telnet           |                                          |
@@ -47,6 +47,10 @@ G-010S-P and other models will not expose an ethernet interface unless the fiber
 - Photonics SPS-34-24T-HP-TDFO {.text-red-200}
 The [Nokia G-010S-A](/ont-nokia-g-010s-a) can be flashed with the Nokia G-010S-P firmware, provided the MTD layout has been changed beforehand to match the new one. For the full procedure, see the post on [lafibre.info](https://lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/msg870551/#msg870551)
 
+## List of software versions
+
+- 3FE56853AOPD39
+
 ## Serial
 
 The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the SFP connector.
@@ -68,6 +72,28 @@ Some USB TTL adapters label TX and RX pins the other way around: try to swap the
 
 ## List of partitions
 
+Partition layouts change depending on which image is booted, in particular:
+
+When booting image0:
+```
+mtd2 ---> image0 (linux)
+mtd5 --> image1
+mtd3 --> rootfs
+mtd4 --> rootfs_data
+```
+When booting image1:
+```
+mtd2 ---> image0
+mtd3 --> image1 (linux)
+mtd4 --> rootfs
+mtd5 --> rootfs_data
+```
+
+For more info [XPONos partition layout](https://web.archive.org/web/20240925035217/https://github.com/XPONos/linux_lantiq-falcon/commit/456f68f69a84c846a542a9f0ea47c37476535dcb).
+
+
+### When booting from image0
+
 | dev  | size     | erasesize | name          |
 | ---- | -------- | --------- | ------------- |
 | mtd0 | 00040000 | 00010000  | "uboot"       |
@@ -77,17 +103,207 @@ Some USB TTL adapters label TX and RX pins the other way around: try to swap the
 | mtd4 | 00370000 | 00010000  | "rootfs_data" |
 | mtd5 | 00800000 | 00010000  | "image1"      |
 
+### When booting from image1
+
+| dev  | size     | erasesize | name          |
+| ---- | -------- | --------- | ------------- |
+| mtd0 | 00040000 | 00010000  | "uboot"       |
+| mtd1 | 00080000 | 00010000  | "uboot_env"   |
+| mtd2 | 00740000 | 00010000  | "image0"      |
+| mtd3 | 00800000 | 00010000  | "linux"       |
+| mtd4 | 006d8077 | 00010000  | "rootfs"      |
+| mtd5 | 00410000 | 00010000  | "rootfs_data" |
+
 # General Settings and Useful Commands
 
+## Bootloader unlock from shell
+::: warning Warning
+It is strongly recommended that you unlock the bootloader before making any major changes to the firmware.
+:::
+```sh
+fw_setenv bootdelay 5
+fw_setenv asc0 0
+fw_setenv preboot "gpio set 3;gpio input 2;gpio input 105;gpio input 106;gpio input 107;gpio input 108"
+```
+
+::: info Info
+In general, the last command is not needed because by default serial is already enabled on SFP PINs.
+:::
+
+## Getting and Setting S/N
+To check the current serial number:
+```sh
+onu gtcsng
+```
+
+To set the current serial number:
+```sh
+onu gtcsns ABCD12345678
+```
+
+## Getting and Setting PLOAM Password
+To check the current password (the password field contains decimal values of ASCII characters):
+```sh
+onu gtccg
+```
+
+To set the current password:
+```sh
+uci set gpon.ploam.nPassword="0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39"
+uci commit 
+```
+
+::: info Info
+There is also the `onu gtc_password_set` command to set the ploam password but it does not seem to work.
+:::
+
+
+## Getting/Setting Speed LAN Mode
+
+The known speed values are as follows:
+
+| Value | Speed    |
+| ----- | -------- |
+| 4     | 1 Gbps   |
+| 5     | 2.5 Gbps |
+
+To set the (H)SGMII Mode:
+
+```sh
+fw_setenv sgmii_mode 5
+```
+
+To remove the value (back to default):
+```sh
+fw_setenv sgmii_mode
+```
+
+To get the (H)SGMII Mode:
+
+```sh
+onu lanpsg 0
+```
+
+The `link_status` value shows the speed.
+
 ##  Disabling Dying Gasp
 ```sh
 fw_setenv nDyingGaspEnable 0
 ```
 
+## Rebooting the ONU
+```sh
+reboot
+```
+
+## Checking whether the connection with the OLT was successful (O5 state)
+
+```sh
+onu ploamsg
+```
+
 ## Enabling the Web UI
 
 To activate the web-ui you can use [this guide from dslreport forum](https://web.archive.org/web/20241205080939/https://www.dslreports.com/forum/r32458588-) archived on [archive.org](https://archive.org/).
 
+## Transferring files to the stick
+
+::: info Info
+If you use a modern OpenSSH version (e.g. >= 8.8) you will have to use the legacy protocol and enable some deprecated algorithms: scp `-oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-dss [...]`
+:::
+
+```sh
+# scp rootfs.bin root@192.168.1.10:/tmp/
+```
+
+## Backup of all partition
+
+Make a backup of all partitions, an easy way is:
+- On the stick run:
+```sh
+cat /proc/mtd
+```
+- For each mtdX run in the lantiq shell:
+```sh
+cp /dev/mtdX /tmp
+```
+
+::: info Info
+If you use a modern OpenSSH version (e.g. >= 8.8) you will have to use the legacy protocol and enable some deprecated algorithms: `scp -oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-dss [...]`
+:::
+
+And in the computer shell:
+```sh
+scp ONTUSER@192.168.1.10:/tmp/mtdX ./
+```
+
+## Checking the currently active image
+
+```sh
+# fw_printenv committed_image
+```
+
+## Booting to a different image
+
+
+```sh
+# fw_setenv committed_image 0|1
+# fw_setenv image0|1_is_valid 1
+```
+
+## Cloning of mtd1 (image 0) into mtd5 (image 1)
+
+::: warning Warning
+Image 0 can be flashed to image 1, while image 1 cannot be flashed to image 0 because it has larger rootfs_data
+:::
+
+The following commands are used to clone image0 to image1 and then boot to it
+```sh
+# cat /dev/mtd2 > /tmp/mtd2.bin
+# mtd -e image1 write /tmp/mtd2.bin image1
+# fw_setenv committed_image 1
+# fw_setenv image1_is_valid 1
+# reboot
+```
+
+## Flashing a new rootfs via SSH
+
+::: info Info
+Only the inactive image can be flashed
+:::
+
+The following commands are used to flash a new rootfs to image1 and then boot to it
+```sh
+# mtd -e image1 write /tmp/rootfs.bin image1
+# fw_setenv committed_image 1
+# fw_setenv image1_is_valid 1
+# reboot
+```
+
+::: warning Warning
+Some OLTs don't like when ONTs don't boot from image 0, therefore the previous procedure must be preceded by the following procedure with inverted images, as to clone image 1 into image 0
+:::
+
+## Flashing a new rootfs via Serial
+
+If you wish to change the firmware via serial, we recommend using the web app: [Web Serial Flash](/ont-nokia-g-010s-p-ymodem)
+
+# TX Fault / Serial
+
+The stick stays in a perpetual "TX Fault" state since the same SFP pin is used for both serial and TX Fault signaling, if that causes you issues (normally it shouldn't) you can issue the commands below to disable it. Note that it will disable both the TX Fault signal and Serial on the stick after boot.
+
+```sh
+fw_setenv asc0 1
+fw_setenv preboot "gpio set 3;gpio input 100;gpio input 105;gpio input 106;gpio input 107;gpio input 108"
+```
+
+In case you need to re-enable it issue the following commands from the bootloader (FALCON)
+
+```sh
+FALCON => setenv asc0 0
+FALCON => saveenv
+```
+
 # Miscellaneous Links
 
 - [alcatel_lucent-lantiq_falcon](https://github.com/minhng99/alcatel_lucent-lantiq_falcon)