Skip to content

About

No description, website, or topics provided.

Resources

Stars

0 stars

Watchers

0 watching

Forks

 
 

Latest commit

 

History

5 Commits

Folders and files

Repository files navigation

EITWatch hardware

Open hardware and firmware for EITWatch: a smartwatch-back planar Electrical Impedance Tomography (EIT) system for hand gesture sensing.

EITWatch prototype: eight planar electrodes in a 31 mm ring on a 40 by 60 mm PCB, mounted under a 40 mm watch case, and worn on the wrist during gesture input

Eight gold-plated disk electrodes sit in a 31 mm ring on a 40 mm × 60 mm PCB. The electrode ring fits a standard 40 mm watch case back; a 20 mm board extension holds the discrete analog front end. A Seeed XIAO ESP32 module plugs into dual 1×7 headers and sequences a multi-depth injection schedule (35 impedance channels per frame).

This release accompanies the paper:

Liu, Alam, and Ahuja. EITWatch: Smartwatch-Integrated Planar Electrical Impedance Tomography for Hand Gesture Recognition. UIST 2026.

Repository layout

hw/
├── README.md                 # this file
├── altium/                   # Altium Designer project sources
├── bom/                      # bill of materials
├── docs/                     # overview figure, schematic PDF, STEP model
├── fabrication/gerber/       # Gerber + NC drill for PCB fab
└── firmware/                 # ESP-IDF firmware (XIAO ESP32-S3)
Path Contents
altium/ Editable schematic, PCB, and libraries (EITWatch.PrjPcb)
docs/overview.png Prototype overview figure
docs/schematic.pdf Printable schematic
docs/eitwatch.step 3D board model
fabrication/gerber/ Fabrication outputs (copper, mask, paste, silkscreen, outline, drill)
bom/BOM.csv PCB BOM (passives + ICs; MCU module and electrodes are off-board)
firmware/ Acquisition firmware and host-side helper scripts

System overview

Item Spec
Board size 40 mm × 60 mm
Electrodes 8 × Ø2 mm gold-plated stainless steel disks on a Ø31 mm ring (~11.9 mm adjacent spacing)
Sensing footprint Fits a 40 mm watch case back; AFE occupies the remaining 20 mm
Excitation AD5930 sinusoid at 50 kHz; ADA4841 V-to-I; ~1 mA peak-to-peak (AD5270-set)
Sensing AD8220 instrumentation amp + AD5270 gain; AD7450 12-bit ADC
Switching 4 × ADG738 8-channel matrix switches
Host MCU Seeed XIAO ESP32-S3 on headers P2 / P3 (firmware in this repo targets esp32s3)
Frame rate ~48 Hz for the 35-channel multi-depth schedule
Stackup (Gerber export) 6 copper layers: GTL, G1–G4, GBL

Key ICs

Designator Part Role
U2 AD5930YRUZ Waveform generator
U5 ADA4841-2YRMZ Voltage-to-current drive
U4, U6 AD5270BRMZ-100 Digital pots (drive current / sense gain)
U3, U7 AD8220ARMZ Instrumentation amplifiers
U8 AD7450BRZ 12-bit SPI ADC
MUX1–MUX4 ADG738BRUZ Electrode matrix switches
U1 TLV73325PDBVT 2.5 V regulator
OS1 ECS-2520MV-500-BL-TR 50 MHz oscillator

Full line items are in bom/BOM.csv. The BOM does not include the XIAO module, watch case, strap, or the eight disk electrodes (those are mechanical / off-board parts).

Fabrication

PCB

  1. Zip fabrication/gerber/ (include the drill/ folder).
  2. Order a 6-layer board matching the Gerber stackup below (or re-export from Altium if you change the stackup).
  3. Suggested defaults for prototype houses (JLCPCB / PCBWay style): 1.6 mm thickness, 1 oz copper, ENIG finish on electrode pads if you plate the disks separately or solder them to pads.
  4. Review silkscreen and keep-out against your watch case before committing a panel.

Gerber layer map

File Layer
main.GTL Top copper (Layer 1)
main.G1 Inner Layer 2
main.G2 Inner Layer 3
main.G3 Inner Layer 4
main.G4 Inner Layer 5
main.GBL Bottom copper (Layer 6)
main.GTS / main.GBS Top / bottom solder mask
main.GTP / main.GBP Top / bottom paste
main.GTO / main.GBO Top / bottom silkscreen
main.GM Board outline
drill/main-Plated.TXT Plated NC drill

Assembly notes

  • Populate the mixed-signal AFE on the top side; electrodes face the skin on the bottom.
  • Mount the eight Ø2 mm gold-plated stainless disks flush so the watch-back contact plane is even.
  • Seat a Seeed XIAO ESP32-S3 on headers P2/P3 with the orientation matching the silkscreen.
  • Power and bring-up: use the firmware hardware-test path before full scanning (see firmware/README.md).

Editing the design

Open altium/EITWatch.PrjPcb in Altium Designer. Main sources:

  • main.SchDoc – primary schematic
  • AC_sch.SchDoc – analog / related sheet
  • main.PcbDoc – PCB layout
  • *.SchLib / *.PcbLib – schematic and footprint libraries
  • PCB.OutJob – output job used to regenerate Gerbers

Re-export Gerbers into fabrication/gerber/ after layout changes.

Firmware

Firmware lives in firmware/ (ESP-IDF v5.2+). It drives the AD5930, ADG738 muxes, AD5270 pots, and AD7450 ADC, and runs the measurement / calibration application layer under FreeRTOS.

cd firmware
. $HOME/esp/esp-idf/export.sh   # adjust to your IDF install
idf.py set-target esp32s3
idf.py build
idf.py -p /dev/tty.usbmodemXXXX flash monitor

See firmware/README.md for structure, flash steps, and bring-up notes. Pin macros in firmware/drivers/board_pins.h use XIAO ESP32-S3 GPIO numbers for pads D0–D10.

Safety and intended use

This is a research prototype for short-duration, IRB-approved human-subject studies or phantom / water-tank experiments. It injects a small AC current into tissue via skin electrodes.

  • Do not use on people with implanted electronic devices (e.g. pacemakers) without appropriate medical / IRB review.
  • Do not use as a medical device or for clinical diagnosis.
  • Keep injected current and contact quality within the design envelope (~1 mA peak-to-peak at 50 kHz in the paper configuration).
  • You are responsible for compliance with local electrical safety and human-subjects rules.

Citation

If you use this hardware or firmware, please cite the UIST 2026 EITWatch paper (update the BibTeX once the ACM DOI is available):

@inproceedings{eitwatch2026,
  author    = {Liu, Xuanyou and Alam, Novel and Ahuja, Karan},
  title     = {{EITWatch}: Smartwatch-Integrated Planar Electrical Impedance Tomography for Hand Gesture Recognition},
  booktitle = {Proceedings of the 39th Annual ACM Symposium on User Interface Software and Technology},
  series    = {UIST '26},
  year      = {2026},
  publisher = {ACM},
  note      = {Camera-ready; replace with ACM DOI when available}
}

License

Copyright 2026 Xuanyou Liu, Novel Alam, and Karan Ahuja.

Material License File
Hardware (altium/, bom/, docs/, fabrication/) CERN-OHL-P-2.0 LICENSE.CERN-OHL-P-2.0
Firmware (firmware/) Apache-2.0 firmware/LICENSE

See LICENSE for the dual-license summary.

Acknowledgments

Designed for research on planar wrist-EIT at Northwestern University. Contact: xuanyou@u.northwestern.edu.

About

No description, website, or topics provided.

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages