Issues

• CANVAS/AFC: fill vendor_name and name in lane_data (from RFID tag, or manual entry)

  OpenCentauri/cosmos#468 · Filter by author Surfoo opened on Nov 3, 2026
  3

• CC2: BED_MESH_CALIBRATE moved position_endstop by 0.2 mm (first layer then too high)

  OpenCentauri/cosmos#462 · Filter by author BorjaLL opened on Nov 1, 2026

• CC2 Combo: Purge line collides with print objects

  OpenCentauri/cosmos#461 · Filter by author maxbrueckl opened on Nov 1, 2026
  1

• CC2: how to revert from Cosmos to stock Elegoo firmware (A/B slot, toolhead/bed MCU)

  OpenCentauri/cosmos#460 · Filter by author BorjaLL opened on Nov 1, 2026
  6

• Load Cell Probe Error: current absolute force of "-18385.5g" exceeds force_safety_limit (+/-3000.0g) before probing! during initial calibration: bed leveling

  OpenCentauri/cosmos#456 · Filter by author JohnDS1 opened on Oct 31, 2026
  5

• mjpegstreamer breaks webcam ui in mainsail on safari

  OpenCentauri/cosmos#433 · Filter by author mmerickel opened on Oct 24, 2026
  3

• skew profile enablement can send printhead out of bounds

  OpenCentauri/cosmos#429 · Filter by author bniggemyer opened on Oct 22, 2026

• Webcam FOV / Resolution

  OpenCentauri/cosmos#422 · Filter by author peepsnet opened on Oct 17, 2026
  3

• Timelapses

  OpenCentauri/cosmos#420 · Filter by author WaveGu1de opened on Oct 16, 2026
  4

• AFC tool-change restoration movement can collide with the purge-tray lever

  OpenCentauri/cosmos#399 · Filter by author Vampiro1 opened on Oct 10, 2026
  3

• CC1 + CANVAS: underextrusion with default extruder run_current 0.7 A, fixed by 0.8 A (stock value)

  OpenCentauri/cosmos#387 · Filter by author iDomi94 opened on Oct 7, 2026

• Adaptive bed meshing vs default

  OpenCentauri/cosmos#375 · Filter by author Notjohnsnow opened on Oct 2, 2026
  1

• CANVAS tool load timed out

  OpenCentauri/cosmos#369 · Filter by author maxpajewski opened on Sep 30, 2026
  7

• MCU shutdown "Timer too close" when M106 P3 (case_fan) is sent right after "calculate extruder phase offset"

  OpenCentauri/cosmos#366 · Filter by author DaniHem opened on Sep 28, 2026
  2

• RESUME fails with "Extrude below minimum temp" when PRINT_START was not used

  OpenCentauri/cosmos#324 · Filter by author Tanguille opened on Sep 11, 2026

• Support DHCP Option 42 (NTP Servers) for Chrony

  OpenCentauri/cosmos#268 · Filter by author rodripr1 opened on Jul 23, 2026

• [CC1] RTL8821CU rtw88 post-bind USB control transfers fail with -EPROTO

  OpenCentauri/cosmos#264 · Filter by author pdscomp opened on Jul 21, 2026

• [CC1] RTL8821CU fails USB enumeration with -EPROTO after warm reboot

  OpenCentauri/cosmos#263 · Filter by author pdscomp opened on Jul 21, 2026

• occasional 'timer too close' during printing

  OpenCentauri/cosmos#246 · Filter by author vytrixGH opened on Jul 14, 2026
  10

• Separate macros for PID tuning and Input Shaping

  OpenCentauri/cosmos#102 · Filter by author RowanSkie opened on Apr 7, 2026
  1

• Inconsistent tach readings between fans, speeds, and relative to spec speed

  OpenCentauri/cosmos#83 · Filter by author robertsamples opened on Apr 4, 2026

• Printer needs reboot after installing cosmos before being able to see wifi networks

  OpenCentauri/cosmos#69 · Filter by author gta4hater opened on Apr 3, 2026
  22