Skip to content
Global-Health-EngineeringPublic

About

Open-source, 3D-printable membrane-filtration manifold for E. coli quantification in drinking water

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Repository files navigation

Licence: CERN-OHL-S v2 Licence: CC BY 4.0 DOI: 10.5281/zenodo.22025813 Deploy site to GitHub Pages


Global Health Engineering, ETH Zurich

This work is certified by the Open Source Hardware Association.

3DPLAM

Open-source, 3D-printable membrane-filtration manifold for Escherichia coli quantification in drinking water. The manifold consists of three printed parts (base, funnel and filter support) and tests drinking water with a syringe and a membrane filter. All three parts print without support structures on any FDM printer. 3DPLAM was validated against a Millipore EZ-Fit™ stainless-steel manifold, the reference instrument for the household drinking-water testing used in WHO/UNICEF water-quality surveys. 3DPLAM is an alternative route to the same measurement and does not replace the Millipore EZ-Fit™. The 3DPLAM design is open and can be printed locally at low cost, whereas the reference instrument can only be bought at a comparatively high price.

The full site, with photos, renders and the print-settings requirement, is available here.

At a glance

Characteristic Description
Parts Base + funnel + filter support (2 concurrent alternatives), no supports
Material cost ≈ $1.30 per set (ABS)
Mass ≈ 52 g
Print time ≈ 100 min
Reference instrument Millipore EZ-Fit™ stainless-steel manifold (≈ $2,460)
Validation 8 sites × 3 manifolds × 3 replicates = 72 filtrations, 16 printed-vs-reference comparisons
Headline result 15 of 16 classifications accepted within the 5 % WHO boundary-tolerance rule; 12 of 16 match exactly with no tolerance applied
Sustainable route Funnel and filter support printable in rPET from recycled bottles

Quick start

  1. Read hardware/README.md for the parts table, envelopes, and the choice between the two filter-support and two funnel variants.
  2. A manifold sliced at default settings is porous. The syringe then draws air through the walls instead of pulling water through the membrane, and filtration fails. Import the profile for your printer from hardware/print-profiles/ and read hardware/print-profiles/README.md for the any-slicer equivalents.
  3. Print stl/base.stl, stl/funnel.stl and stl/filter-support-strand-mesh.stl (the default, validated filter support) as separate jobs.
  4. Assemble and operate the manifold following docs/assembly.md and docs/operation.md.

When printing in recycled PET instead of ABS, use the geometry in hardware/rpet/ instead of hardware/stl/, and follow docs/rpet.md.

Repository layout

hardware/              CERN-OHL-S v2: the parts to print
├── README.md          Parts table, envelopes, variant choices
├── stl/               Printable meshes (millimetres)
├── step/              Editable B-rep: modify the design here
├── rpet/              Shrinkage-compensated geometry for recycled PET
├── assembly/          Reference assembly (not a printable part)
├── print-profiles/    Slicer settings for a gas-tight print
└── onshape.md         Source CAD in Onshape, copy it and edit your own

docs/                  CC BY 4.0: how to print, build, run and interpret it
├── printing.md        Print settings, orientation, materials matrix
├── assembly.md        Putting the three parts together
├── operation.md       The E. coli filtration protocol
├── validation.md      What was tested and the headline result
├── rpet.md            Bottle-to-filament, with upstream credit
├── design-history.md  Version history predating this repository
└── thesis.pdf         The BSc thesis this release is drawn from

data/                  CC BY 4.0: the tidied functional and material test data
tools/                 Scripts that regenerate every figure and gate CI
site/                  This repository's GitHub Pages site (Astro)
CITATION.cff           Machine-readable citation metadata

Citation

If you use this hardware, please cite it as shown below. CITATION.cff holds the machine-readable record.

3DPLAM, 3D-Printed Lightweight Affordable Manifold for Microbial Water Quality Testing. Moreno Gabriel, Jakub Tkaczuk, Caetano Dorea, Elizabeth Tilley. ETH Zürich, Global Health Engineering. Version 1.0.1. https://doi.org/10.5281/zenodo.22025813

License

Different parts of this repository are released under different licenses, following standard practice for open-hardware projects:

Component License
Hardware design (CAD, STL, STEP in hardware/) CERN-OHL-S v2
Documentation (docs/, this README) CC BY 4.0
Datasets (data/) CC BY 4.0
Site and tooling (site/, tools/) CC BY 4.0

The rPET route in hardware/rpet/ and docs/rpet.md rebuilds Petamentor2, an open-source PET-bottle-to-filament machine designed by Ondřej Šraitr (https://petamentor2.com/). This repository credits Petamentor2 and does not redistribute its files. To build one, use the upstream project.

About

Open-source, 3D-printable membrane-filtration manifold for E. coli quantification in drinking water

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages