X-Plane crashes after take-off if flightplan is activ

[Athelas-de]

X-Plane 10.32 (64 bit, new clean installation, no additional plugins) directly after takeoff. Last log.txt entry "fms: takeoff recorded at 11:26, flight status set to cruise"

That happens only with acitv flight plan but every time. Flying with "FMS not ready" works.

[Athelas-de]

last extended logs (verbose)
[2015-02-14 23:11:50] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:50] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:50] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:50] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:50] [debug] mfdpage: refreshing joystick display (fms.planner)
[2015-02-14 23:11:50] [debug] out_saitek: printing line 0: 'ESNK->ESNO 44m'
[2015-02-14 23:11:50] [debug] out_saitek: printing line 1: 'D:00:17 F: 188'
[2015-02-14 23:11:50] [debug] out_saitek: printing line 2: 'TD: 10m to OD'
[2015-02-14 23:11:50] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:50] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:50] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:50] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:51] [debug] fms_fp: updating expected time for KG at 11:28
[2015-02-14 23:11:51] [debug] fms_fp: updating expected time for OD at 11:41
[2015-02-14 23:11:51] [debug] fms_fp: updating expected time for ESNO at 11:42
[2015-02-14 23:11:51] [info] fms: takeoff recorded at 11:26, flight status set to cruise
[2015-02-14 23:11:51] [debug] mfdpage: refreshing joystick display (fms.planner)
[2015-02-14 23:11:51] [debug] out_saitek: printing line 0: 'ESNK->ESNO 44m'
[2015-02-14 23:11:51] [debug] out_saitek: printing line 1: 'D:00:17 F: 188'
[2015-02-14 23:11:51] [debug] out_saitek: printing line 2: 'TD: 10m to OD'
[2015-02-14 23:11:51] [debug] mfdpage: refreshing joystick display (time)
[2015-02-14 23:11:51] [verbose] mfdpage: updating time 11:26 - 2015/2/14
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:51] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:52] [verbose] fms_fp: creating FP item 0 with name ESNK (BIBUP) type 1 lat 63.048611 lon 17.768890 alt 34
[2015-02-14 23:11:52] [verbose] fms_fp: creating FP item 3 with name ESNO (CARSI) type 1 lat 63.407780 lon 18.992500 alt 354
[2015-02-14 23:11:52] [verbose] fms: we are flying to entry ESNK (0)

[Athelas-de]

Sorry, closed by mistake

[user2684]

Hi, thanks for reporting this issue! Which aircraft are you flying with?
I'm wondering if It may be related to issue #30

[Athelas-de]

I fly with standard air plane of X-Plane beechcraft baron 58. Interesting
(and important information) is that it crashes just at the moment when the
wheels lift off from runway.
Am 18.02.2015 19:27 schrieb "user2684" notifications@github.com:

Hi, thanks for reporting this issue! Which aircraft are you flying with?
I'm wondering if It may be related to issue #30
#30 (#30
#30)

—
Reply to this email directly or view it on GitHub
#44 (comment).

[user2684]

Thanks, so if this happens with every aircraft just after take off sounds like a serious issue which never happened to me. And I cannot see anything strange in the logs neither :-/
Unfortunately I do not have some spare time to work on the plugin in the near future but this issue will be the first one I will look at whenever I can.

Thanks again and I hope I can come back to you for more details when needed!

[Shirkan79]

have the same problem as the original poster.
Just after taking off, xplane crashes.
nothing really informational in the log:
2015-06-14 10:10:53] [verbose] fms_fp: creating FP item 0 with name EDLT (23E72) type 1 lat 51.944721 lon 7.772778 alt 177
[2015-06-14 10:10:53] [verbose] fms_fp: creating FP item 21 with name ETHL (19W45) type 1 lat 48.220165 lon 9.910167 alt 1766
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for HMM at 08:26
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for DOMEG at 08:28
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for REDSU at 08:33
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for GMH at 08:35
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for GETNI at 08:36
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for SIGEN at 08:39
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for BIGSU at 08:41
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for TESGA at 08:43
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for NEGIX at 08:44
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for BOMBI at 08:47
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for NOKDI at 08:49
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for RID at 08:50
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for ODAVU at 08:50
[2015-06-14 10:10:53] [debug] fms_fp: updating expected time for ANEKI at 08:54
[2015-06-14 10:10:54] [debug] fms_fp: updating expected time for NEKLO at 08:54
[2015-06-14 10:10:54] [debug] fms_fp: updating expected time for INKAM at 08:56
[2015-06-14 10:10:54] [debug] fms_fp: updating expected time for LAMGO at 08:58
[2015-06-14 10:10:54] [debug] fms_fp: updating expected time for SUL at 09:03
[2015-06-14 10:10:54] [debug] fms_fp: updating expected time for REUTL at 09:09
[2015-06-14 10:10:54] [debug] fms_fp: updating expected time for PELOG at 09:13
[2015-06-14 10:10:54] [debug] fms_fp: updating expected time for ETHL at 09:16
[2015-06-14 10:10:54] [info] fms: takeoff recorded at 08:25, flight status set to cruise
[2015-06-14 10:10:54] [all] data: 'sim/cockpit2/radios/indicators/gps_dme_distance_nm' type 2 reported new data (5.44164)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/cockpit2/radios/indicators/gps_dme_distance_nm': 5.44164
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/misc/h_ind' type 2 reported new data (625.83)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/flightmodel/misc/h_ind': 625.83
[2015-06-14 10:10:54] [all] mfdpage: page flight.low (0) received the updated 'sim/flightmodel/misc/h_ind': 625.83
[2015-06-14 10:10:54] [all] mfdpage: page fms.refresh (0) received the updated 'sim/flightmodel/misc/h_ind': 625.83
[2015-06-14 10:10:54] [verbose] fms_fp: creating FP item 0 with name EDLT (23E72) type 1 lat 51.944721 lon 7.772778 alt 177
[2015-06-14 10:10:54] [verbose] fms_fp: creating FP item 21 with name ETHL (19W45) type 1 lat 48.220165 lon 9.910167 alt 1766
[2015-06-14 10:10:54] [all] data: 'sim/cockpit2/radios/indicators/gps_dme_time_min' type 2 reported new data (4.06588)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/cockpit2/radios/indicators/gps_dme_time_min': 4.06588
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/position/vh_ind_fpm2' type 2 reported new data (72.1985)
[2015-06-14 10:10:54] [all] mfdpage: page flight.low (0) received the updated 'sim/flightmodel/position/vh_ind_fpm2': 72.1985
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/position/indicated_airspeed2' type 2 reported new data (83.6063)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/flightmodel/position/indicated_airspeed2': 83.6063
[2015-06-14 10:10:54] [all] mfdpage: page flight.low (0) received the updated 'sim/flightmodel/position/indicated_airspeed2': 83.6063
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/position/true_airspeed' type 2 reported new data (43.3722)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/flightmodel/position/true_airspeed': 43.3722
[2015-06-14 10:10:54] [all] data: 'sim/weather/speed_sound_ms' type 2 reported new data (339.169)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/weather/speed_sound_ms': 339.169
[2015-06-14 10:10:54] [all] data: 'sim/weather/wind_direction_degt[2]' type 2 reported new data (-0.605796)
[2015-06-14 10:10:54] [all] mfdpage: page weather.wind (0) received the updated 'sim/weather/wind_direction_degt[2]': -0.605796
[2015-06-14 10:10:54] [all] data: 'sim/weather/temperature_le_c' type 2 reported new data (14.0872)
[2015-06-14 10:10:54] [all] mfdpage: page weather.condition (0) received the updated 'sim/weather/temperature_le_c': 14.0872
[2015-06-14 10:10:54] [all] data: 'sim/cockpit2/gauges/indicators/wind_heading_deg_mag' type 2 reported new data (260)
[2015-06-14 10:10:54] [all] mfdpage: page weather.condition (0) received the updated 'sim/cockpit2/gauges/indicators/wind_heading_deg_mag': 260
[2015-06-14 10:10:54] [all] data: 'sim/weather/temperature_ambient_c' type 2 reported new data (13.1513)
[2015-06-14 10:10:54] [all] mfdpage: page weather.condition (0) received the updated 'sim/weather/temperature_ambient_c': 13.1513
[2015-06-14 10:10:54] [all] data: 'sim/weather/wind_direction_degt[1]' type 2 reported new data (-0.605796)
[2015-06-14 10:10:54] [all] mfdpage: page weather.wind (0) received the updated 'sim/weather/wind_direction_degt[1]': -0.605796
[2015-06-14 10:10:54] [all] mfdpage: requested joystick refresh for time
[2015-06-14 10:10:54] [all] mfdpage: requested joystick refresh for welcome
[2015-06-14 10:10:54] [all] data: 'sim/weather/wind_direction_degt[0]' type 2 reported new data (259.394)
[2015-06-14 10:10:54] [all] mfdpage: page flight.low (0) received the updated 'sim/weather/wind_direction_degt[0]': 259.394
[2015-06-14 10:10:54] [all] mfdpage: page weather.wind (0) received the updated 'sim/weather/wind_direction_degt[0]': 259.394
[2015-06-14 10:10:54] [all] mfdpage: page weather.condition (0) received the updated 'sim/weather/wind_direction_degt[0]': 259.394
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/position/groundspeed' type 2 reported new data (41.8294)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/flightmodel/position/groundspeed': 41.8294
[2015-06-14 10:10:54] [all] mfdpage: page fms.refresh (0) received the updated 'sim/flightmodel/position/groundspeed': 41.8294
[2015-06-14 10:10:54] [verbose] fms_fp: creating FP item 0 with name EDLT (23E72) type 1 lat 51.944721 lon 7.772778 alt 177
[2015-06-14 10:10:54] [verbose] fms_fp: creating FP item 21 with name ETHL (19W45) type 1 lat 48.220165 lon 9.910167 alt 1766
[2015-06-14 10:10:54] [all] data: 'sim/cockpit2/radios/indicators/gps_dme_distance_nm' type 2 reported new data (5.43683)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/cockpit2/radios/indicators/gps_dme_distance_nm': 5.43683
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/misc/h_ind' type 2 reported new data (624.761)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/flightmodel/misc/h_ind': 624.761
[2015-06-14 10:10:54] [all] mfdpage: page flight.low (0) received the updated 'sim/flightmodel/misc/h_ind': 624.761
[2015-06-14 10:10:54] [all] mfdpage: page fms.refresh (0) received the updated 'sim/flightmodel/misc/h_ind': 624.761
[2015-06-14 10:10:54] [verbose] fms_fp: creating FP item 0 with name EDLT (23E72) type 1 lat 51.944721 lon 7.772778 alt 177
[2015-06-14 10:10:54] [verbose] fms_fp: creating FP item 21 with name ETHL (19W45) type 1 lat 48.220165 lon 9.910167 alt 1766
[2015-06-14 10:10:54] [all] data: 'sim/cockpit2/radios/indicators/gps_dme_time_min' type 2 reported new data (4.01299)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/cockpit2/radios/indicators/gps_dme_time_min': 4.01299
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/position/vh_ind_fpm2' type 2 reported new data (-5.7591)
[2015-06-14 10:10:54] [all] mfdpage: page flight.low (0) received the updated 'sim/flightmodel/position/vh_ind_fpm2': -5.7591
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/position/indicated_airspeed2' type 2 reported new data (84.5815)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/flightmodel/position/indicated_airspeed2': 84.5815
[2015-06-14 10:10:54] [all] mfdpage: page flight.low (0) received the updated 'sim/flightmodel/position/indicated_airspeed2': 84.5815
[2015-06-14 10:10:54] [all] data: 'sim/flightmodel/position/true_airspeed' type 2 reported new data (43.8783)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/flightmodel/position/true_airspeed': 43.8783
[2015-06-14 10:10:54] [all] data: 'sim/weather/speed_sound_ms' type 2 reported new data (339.171)
[2015-06-14 10:10:54] [all] mfdpage: page flight.high (0) received the updated 'sim/weather/speed_sound_ms': 339.171
[2015-06-14 10:10:54] [all] data: 'sim/weather/wind_direction_degt[2]' type 2 reported new data (-0.605873)
[2015-06-14 10:10:54] [all] mfdpage: page weather.wind (0) received the updated 'sim/weather/wind_direction_degt[2]': -0.605873
[2015-06-14 10:10:54] [all] data: 'sim/weather/temperature_le_c' type 2 reported new data (14.1112)
[2015-06-14 10:10:54] [all] mfdpage: page weather.condition (0) received the updated 'sim/weather/temperature_le_c': 14.1112
[2015-06-14 10:10:54] [all] data: 'sim/weather/temperature_ambient_c' type 2 reported new data (13.1534)
[2015-06-14 10:10:54] [all] mfdpage: page weather.condition (0) received the updated 'sim/weather/temperature_ambient_c': 13.1534
[2015-06-14 10:10:54] [all] data: 'sim/weather/wind_direction_degt[1]' type 2 reported new data (-0.605873)
[2015-06-14 10:10:54] [all] mfdpage: page weather.wind (0) received the updated 'sim/weather/wind_direction_degt[1]': -0.605873
[2015-06-14 10:10:54] [all] data: 'sim/weather/wind_direction_degt[0]' type 2 reported new data (259.394)
[2015-06-14 10:10:54] [all] mfdpage: page flight.low (0) received the updated 'sim/weather/wind_direction_degt[0]': 259.394
[2015-06-14 10:10:54] [all] mfdpage: page weather.wind (0) received the updated 'sim/weather/wind_direction_degt[0]': 259.394
[2015-06-14 10:10:54] [all] mfdpage: page weather.condition (0) received the updated 'sim/weather/wind_direction_degt[0]': 259.394
[2015-06-14 10:10:54] [all] data: 'sim/time/zulu_time_sec' type 2 reported new data (30354)
[2015-06-14 10:10:54] [all] mfdpage: page fms.scheduler (0) received the updated 'sim/time/zulu_time_sec': 30354
[2015-06-14 10:10:54] [all] mfdpage: page fms.planner (0) received the updated 'sim/time/zulu_time_sec': 30354
[2015-06-14 10:10:54] [all] mfdpage: page fms.status (0) received the updated 'sim/time/zulu_time_sec': 30354
[2015-06-14 10:10:54] [all] mfdpage: page fms.refresh (0) received the updated 'sim/time/zulu_time_sec': 30354
[2015-06-14 10:10:54] [verbose] fms_fp: creating FP item 0 with name EDLT (23E72) type 1 lat 51.944721 lon 7.772778 alt 177
[2015-06-14 10:10:54] [verbose] fms_fp: creating FP item 21 with name ETHL (19W45) type 1 lat 48.220165 lon 9.910167 alt 1766
[2015-06-14 10:10:54] [verbose] fms: we are flying to entry HMM (1)

this is a showstopper... I have to remove the plugin, when i woulf like to fly with an active flightplan loaded :/

[user2684]

Hi Shirkan79, thanks for sharing the logs. May you also please share X-Plane logs when the issue occurs (Log.txt in the main X-Plane folder and if there are other crash report files)? Or if you are running it under OSX, the stack trace which is reported when it crashes. Unfortunately since I cannot reproduce the problem, I need a starting point for debugging it (e.g. which module of the plugin is crashing).

Thanks in advance

[Smertje]

First of all, thanks to user2684 for this great plugin!!! But... same issue here :-( XPlane 10.45b, Win10, loaded Standard Flight Plan - crashes right at approx. 100 knts when attempting to take off...

[user2684]

Hi Smertje, unfortunately I'm still struggling in reproducing the problem and without an indicator pointing to what is causing the issue I will not be able to fix it. All my tests on the three platforms (windows, linux, OSX) went fine but I understand the variables are really a lot (FP, x-plane version, OS version, other plugins, etc.). If you have the logs to share with me and any kind of stack trace would defintely be of great help!

Thanks! D.

[Smertje]

Hi D.,

thanks for your quick reply! I can understand that it is quite a
challenge getting this wonderful plug-in running on so much systems out
there! Thanks again for your hard work and that great plug-in!!! I was
looking exactly for something like that :-)

Please find my log-files attached to this mail. Just a little more infos
regarding my system specs:

 * Rig:    Intel I5 2700, 16 GB RAM, NVIDIA GeForce TI 680 Boost 

with 2 GB RAM running latest drivers
* OS: Win 10 Home 64 bit
* XP: X-Plane 10.45b2
* Saitek X52 Pro with latest drivers - Version: 7.0.47.1

The flight plan is a standard FMS-Plan created with XFMC, from my
homebase Innsbruck, AUT (LOWI) to Vienna (LOWW) with SIDs and STARs,
Navigraph Data cycle 1513.

X-Plane crashed right before rotating from RW08... unfortunately!

Thanks for your help and it would be great if you'd find any solution.

Regards, Roland

Am 24.01.2016 um 15:52 schrieb user2684:

Hi Smertje, unfortunately I'm still struggling in reproducing the
problem and without an indicator pointing to what is causing the issue
I will not be able to fix it. All my tests on the three platforms
(windows, linux, OSX) went fine but I understand the variables are
really a lot (FP, x-plane version, OS version, other plugins, etc.).
If you have the logs to share with me and any kind of stack trace
would defintely be of great help!

Thanks! D.

—
Reply to this email directly or view it on GitHub
#44 (comment).

log.txt for X-Plane 10.45b2 (64-bit build 104501) compiled on Jan 7 2016 19:20:21
X-Plane started on Mon Jan 25 11:11:38 2016

This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.
If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.

Windows 10.0 (build 10240/2)
This is a 64-bit version of Windows.
CPU type: 8664
Physical Memory (total for computer): 17156182016
Maximum Virtual Memory (for X-Plane only): 140737488224256
CPU 0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz Speed (mhz): 3093
CPU 0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz Speed (mhz): 3093
CPU 0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz Speed (mhz): 3093
CPU 0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz Speed (mhz): 3093

X-System folder:'Z:\X-Plane 10/', case sensitive=0

WGL_ARB_buffer_region WGL_ARB_create_context WGL_ARB_create_context_profile WGL_ARB_create_context_robustness WGL_ARB_context_flush_control WGL_ARB_extensions_string WGL_ARB_make_current_read WGL_ARB_multisample WGL_ARB_pbuffer WGL_ARB_pixel_format WGL_ARB_pixel_format_float WGL_ARB_render_texture WGL_ATI_pixel_format_float WGL_EXT_create_context_es_profile WGL_EXT_create_context_es2_profile WGL_EXT_extensions_string WGL_EXT_framebuffer_sRGB WGL_EXT_pixel_format_packed_float WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_NVX_DX_interop WGL_NV_DX_interop WGL_NV_DX_interop2 WGL_NV_copy_image WGL_NV_delay_before_swap WGL_NV_float_buffer WGL_NV_multisample_coverage WGL_NV_render_depth_texture WGL_NV_render_texture_rectangle

OpenGL Vendor : NVIDIA Corporation
OpenGL Render : GeForce GTX 650 Ti BOOST/PCIe/SSE2
OpenGL Version : 4.5.0 NVIDIA 361.43 (450/0)
OpenGL Extensions: GL_AMD_multi_draw_indirect GL_AMD_seamless_cubemap_per_texture GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_bindless_texture GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_compute_shader GL_ARB_compute_variable_group_size GL_ARB_conditional_render_inverted GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_cull_distance GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_derivative_control GL_ARB_direct_state_access GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_indirect GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_ES3_1_compatibility GL_ARB_ES3_2_compatibility GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_gpu_shader_int64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_parallel_shader_compile GL_ARB_pipeline_statistics_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_query_buffer_object GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counter_ops GL_ARB_shader_atomic_counters GL_ARB_shader_ballot GL_ARB_shader_bit_encoding GL_ARB_shader_clock GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_image_samples GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sparse_buffer GL_ARB_sparse_texture GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transform_feedback_overflow_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset_clamp GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback2 GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KHR_context_flush_control GL_KHR_debug GL_KHR_no_error GL_KHR_robust_buffer_access_behavior GL_KHR_robustness GL_KTX_buffer_region GL_NV_bindless_multi_draw_indirect GL_NV_bindless_multi_draw_indirect_count GL_NV_bindless_texture GL_NV_blend_equation_advanced GL_NV_blend_square GL_NV_command_list GL_NV_compute_program5 GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_draw_texture GL_NV_ES1_1_compatibility GL_NV_ES3_1_compatibility GL_NV_explicit_multisample GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_gpu_program4 GL_NV_internalformat_sample_query GL_NV_gpu_program4_1 GL_NV_gpu_program5 GL_NV_gpu_program5_mem_extended GL_NV_gpu_program_fp64 GL_NV_gpu_shader5 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_shader_atomic_counters GL_NV_shader_atomic_float GL_NV_shader_buffer_load GL_NV_shader_storage_buffer_object GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_transform_feedback2 GL_NV_uniform_buffer_unified_memory GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_attrib_integer_64bit GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_NVX_gpu_memory_info GL_NVX_nvenc_interop GL_NV_shader_thread_group GL_NV_shader_thread_shuffle GL_KHR_blend_equation_advanced GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum GL_WIN_swap_hint WGL_EXT_swap_control

threaded_avail : 1 aniso_avail : 1 timer_avail : 1 sync/fence : 1
pbo_avail : 1 frameblit_avail : 1
gpu_shad4_avail : 1 shad_lod_avail : 1 array_tex_avail : 1 texture_rg : 1
tex_float_avail : 1 seamless_avail : 1 drawbuf2_avail : 1 packed_stencil : 1
framebuffer_srgb : 1 copy_buf_avail : 1 ubo_avail : 1 gshader_avail : 1
instance_avail : 1 dis_fog_avail : 1 pinned_avail : 0 debug_avail : 1
max tex units : 32 (32/8)
max iso filtering: 16.000000
max texture size : 16384 (hardware limit)
max point size : 189.875000
idx in vram : 1
GLSL Version :4.50 NVIDIA/450
first-gen shaders: 0
(16/4096/124/192/32/4096/4096)
This video card is: DX10 or 11 - With instancing
Note: X-Plane preferences are set to enable FSAA, but it is disabled by the driver control panel.
CPU count : 4
OpenAL loaded: Resources/dlls/64/openal32.dll
OpenAL devices: OpenAL Soft
Open AL default device:OpenAL Soft
OpenAL vendor : OpenAL Community
OpenAL renderer : OpenAL Soft
OpenAL version : 1.1
OpenAL hardware : OpenAL Soft
OpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_DEDICATED ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context ALC_SOFTX_device_clock ALC_SOFTX_HRTF ALC_SOFT_loopback ALC_SOFTX_midi_interface ALC_SOFT_pause_device AL_EXT_ALAW AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXT_source_distance_model AL_LOKI_quadriphonic AL_SOFT_block_alignment AL_SOFT_buffer_samples AL_SOFT_buffer_sub_data AL_SOFT_deferred_updates AL_SOFT_direct_channels AL_SOFT_loop_points AL_SOFT_MSADPCM AL_SOFT_source_latency AL_SOFT_source_length

Fetching plugins for Z:\X-Plane 10/Resources/plugins

Loaded: Z:\X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl (xpsdk.examples.pluginadmin).

Airport-Navigator v1.3.1 [INFO]: XPluginStart
Airport-Navigator v1.3.1 [INFO]: AptNav::pluginStart
Airport-Navigator v1.3.1 [INFO]: loading X-Plane apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Resources\default scenery\default apt dat\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading custom sceneries ...
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery.DS_Store\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EBBR Brussels\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EDDF Frankfurt\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EDDT Berlin Tegel\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EDLP Paderborn-Lippstadt\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EGBB Birmingham\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EGKK London-Gatwick\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EGLL Heathrow\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EGPF Glasgow\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - EGSS London-Stansted\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - LEBL Barcelona\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - LEMD Madrid\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - LFMN Nice Cote d Azur X\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - LFPG Paris CDG\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - LFPO Paris Orly\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - LPFR Faro\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Aerosoft - LSGG Genf\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Europe_Library\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\ff_library\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Global Airports\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\KSEA Demo Area\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\KSEA Demo Terrain\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\LIRF\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\LOWI\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\LOWI Demo Area\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\LOWS\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\LOWW\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\OpenSceneryX\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Osm_Europe\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\R2_Library\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\README.txt\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\READ_BEFORE_INSTALLATION.txt\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\scenery_packs.ini\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Seasons_assets\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Seasons_N_Autumn\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Seasons_N_Winter1\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Seasons_N_Winter2\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Seasons_S_Autumn\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Seasons_S_Winter\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\Urban_Maxx_Extreme_V2_3D\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [INFO]: loading Z:\X-Plane 10\Custom Scenery\zzz_Treelines_Farms_Europe_v2\Earth nav data\apt.dat
Loaded: Z:\X-Plane 10/Resources/plugins/Airport-Navigator/64/win.xpl (ansorg.xplane.aptnav).

FlyWithLua: Your system path is Z:\X-Plane 10/
FlyWithLua: Plugin Dir: Z:\X-Plane 10/Resources/plugins/FlyWithLua
FlyWithLua: Plugin Scripts Dir: Z:\X-Plane 10/Resources/plugins/FlyWithLua/Scripts
Loaded: Z:\X-Plane 10/Resources/plugins/FlyWithLua/64/win.xpl (CarstenLynker.FlyWithLua).

Gizmo64: v14.12.31.0101 Windows Starting up...
built: Jun 12 2015, 02:51:49
Gizmo64: X-Plane Folder: (Z:/X-Plane 10/)
Gizmo64: Loading..
Gizmo64: Graphics Init..
Gizmo64: Finding Common DataRefs..
Gizmo64: Creating menus..
Gizmo64: XPluginStart() complete.
Loaded: Z:\X-Plane 10/Resources/plugins/Gizmo64.plugin/64/win.xpl (gizmo.x-plugins.com).

PythonInterfaceVersionNumber = 2.73.06
Loaded: Z:\X-Plane 10/Resources/plugins/PythonInterface/64/win.xpl (sandybarbour.projects.pythoninterface).

Loaded: Z:\X-Plane 10/Resources/plugins/SilverLining/64/win.xpl (SilverLiningV3.Clouds).

HSI start

Z:\X-Plane 10\Resources\plugins\XFMC\Textures\xfmc.png

Z:\X-Plane 10\Resources\plugins\XFMC\Textures\athr_lit.png

Z:\X-Plane 10\Resources\plugins\XFMC\Textures\exec_lit.png

Z:\X-Plane 10\Resources\plugins\XFMC\Textures\ap_lit.png

Z:\X-Plane 10\Resources\plugins\XFMC\Textures\lnav_lit.png

Z:\X-Plane 10\Resources\plugins\XFMC\Textures\vnav_lit.png

Z:\X-Plane 10\Resources\plugins\XFMC\Textures\xfmc_0_lit.png

Loaded: Z:\X-Plane 10/Resources/plugins/XFMC/64/win.xpl (klm-va.com).

[xcontrol/64/win.xpl]: It is illegal to register a command starting with sim/
[xcontrol/64/win.xpl]: It is illegal to register a command starting with sim/
[xcontrol/64/win.xpl]: It is illegal to register a command starting with sim/
[xcontrol/64/win.xpl]: It is illegal to register a command starting with sim/
Loaded: Z:\X-Plane 10/Resources/plugins/xcontrol/64/win.xpl (copai.equipment.control).

Airport-Navigator v1.3.1 [INFO]: AptNav::pluginEnable
Airport-Navigator v1.3.1 [INFO]: loading hotkey CENTER
Airport-Navigator v1.3.1 [INFO]: loading hotkey ENABLE
Airport-Navigator v1.3.1 [INFO]: loading hotkey ZOOM_RESET
Airport-Navigator v1.3.1 [INFO]: loading hotkey ZOOM_IN
Airport-Navigator v1.3.1 [INFO]: loading hotkey ZOOM_OUT
Airport-Navigator v1.3.1 [INFO]: loading hotkey DOWN
Airport-Navigator v1.3.1 [INFO]: loading hotkey UP
Airport-Navigator v1.3.1 [INFO]: loading hotkey LEFT
Airport-Navigator v1.3.1 [INFO]: loading hotkey RIGHT
Airport-Navigator v1.3.1 [INFO]: loading hotkey TOGGLE_COMMWIN
Gizmo64: Plugin Enable..
Gizmo64: Init http thread..
Gizmo64: Init Mapping..
Gizmo64: Init cURL.
Gizmo64: Calling gizmo_Start().
Gizmo64: OpenAL: Using shared OpenAL context..
Gizmo64: Machine ID:(6a9bac8d59a6c66187f44985c411ea4b)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (plugins/EZ-DRM/Icon.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (CRJ200_icon.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (Z:/X-Plane 10/Resources/plugins/MaxxFX/product_registration.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (Z:/X-Plane 10/Resources/plugins/SoundMaxx/product_registration.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (Z:/X-Plane 10/Resources/plugins/SeasonsXP/product_registration.png)
Gizmo64: LoadFirmware() completed.
Gizmo64: Register Callbacks..
Gizmo64: Register key sniffer..
Gizmo64: Building Mouse Trap..
Gizmo64: Plugin Enabled.
SkyMaxx Pro: SilverLining initialized OK.
==== CHANGING LANGUAGE TO: Deutsch. ====
ERROR: language file line 'radial: ====Radial:' does not have the same trailing spaces.
ERROR: language file line 'distance: ====Entfernung:' does not have the same trailing spaces.
ERROR: language file line 'ELLIPSE====' missing right side translation.
ERROR: language file line 'Enter the arm and maximum weight of the passengers and cargo that you expect to carry here.====' missing right side translation.
ERROR: language file line 'Then go to the next tab over to see the range of weight and balance you could encounter in flight!====' missing right side translation.
ERROR: language file line 'NOTE: THIS IS ONLY FOR WEIGHT AND BALANCE INVESTIGATION FOR YOU, AND DOES NOT AFFECT X-PLANE IN ANY WAY!====' missing right side translation.
ERROR: language file line 'Each red dot is a possible loading configuration. See here what range of weight and CG you could see in flight!====' missing right side translation.
ERROR: language file line 'Enter weights below to see the weight and CG for that load.====' missing right side translation.
ERROR: language file line 'cg|-at current test====' missing right side translation.
ERROR: language file line 'weight|-at current test====' missing right side translation.
ERROR: language file line 'fwd limit====' missing right side translation.
ERROR: language file line '|aft limit====' missing right side translation.
ERROR: language file line 'wgt min====' missing right side translation.
ERROR: language file line '|wgt max====' missing right side translation.
ERROR: language file line '-steers with gear | { Check this to let the light steer with the landing gear steering!====' missing right side translation.
ERROR: language file line '-aoa|====' missing right side translation.
ERROR: language file line 'Spoolup/Boost====' missing right side translation.
ERROR: language file line '|has verbal 500 AGL callout { ====' missing right side translation.
ERROR: language file line 'ang{ This is the angle of the lowest value we can display. You can wrap from 0 to 720 for 2 rotations, or 0 to NEGATIVE 360 to go backwards once, for example! Enter any angles you like, even negative ones, and even values well greater than 360. Zero is obviously the top of the instrument.====' missing right side translation.
ERROR: language file line 'RAM-inlet pressure recovery|(fraction) { This is the percentage of the RAM air pressure that your inlet manages to recover to increase engine power.====' missing right side translation.
ERROR: language file line 'prop mass ratio|(to solid aluminum) { This is how heavy the prop or rotor is compared to one made of pure aluminum. Composite props, for example, are lighter. Heavier props speed up and slow down more slowly, and provide more auto-rotation ability in helicopters.====' missing right side translation.
ERROR: language file line 'minimum prop governor RPM|(engine RPM) { If you pull the prop control back, you can lower the engine RPM to this setting. This does NOT include reverse or beta or feathered... enter the prop pitches for those things over to the left, and whatever rpm you get as a result, you get.====' missing right side translation.
ERROR: language file line 'max efficient inlet Mach|(Mach) { This is the maximum mach number at which the inlet can pass air to the engine efficiently. Above this mach number, losses in shock waves around the inlet will reduce engine efficiency.====' missing right side translation.
ERROR: language file line 'fan RPM at 100% N1|(rpm)====' missing right side translation.
ERROR: language file line '{ The prop direction will indicate which way the engine torques the craft under power. For jets, this is the compressor rotation direction.====' missing right side translation.
ERROR: language file line 'electric engine drive efficiency|(ratio) { If you have an electric engine, this percentage of the power coming from the battery that will make it to the prop.====' missing right side translation.
ERROR: language file line 'electric engine re-gen efficiency|(ratio) { If you have an electric engine with re-gen braking, enter the efficiency of that re-gen braking here, and this percentage of the power going into the prop (if any) will be loaded into the battery.====' missing right side translation.
ERROR: language file line '|CWS button adjusts altitude hold { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hold the CWS button while flying up or down in altitude mode to change the altitude selection.====' missing right side translation.
ERROR: language file line '|auto-load speed into pre-sel when ASI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation.
ERROR: language file line '|auto-load VVI into pre-sel when VVI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation.
ERROR: language file line 'has radio-alt decision-height callout|{ If you enter a decision-height into a radio altimeter in the cockpit, you will get a callout when you get to or near that altitude.====' missing right side translation.
ERROR: language file line 'has radio-alt callout advance|(ft) { SOME radio altimeters give the decision-height callout in ADVANCE of the decision-height to give you some warning. Enter that advance, in feet, here.====Radarhöhenmesser-Warnung im Voraus|(Fuß) { Manche Radarhöhenmesser rufen die Entscheidungshöhe vor dem Erreichen der Höhe aus, sozusagen als Vorwarnung. Geben Sie diese Höhendifferenz hier in Fuß ein. ' does not have the same trailing spaces.
ERROR: language file line 'TOP check to trigger MASTER CAUTION. BOTTOM check to trigger MASTER WARNING. SELECTOR for WAV FILE to play in the your aircraft's SOUNDS/CUSTOM folder.====' missing right side translation.
ERROR: language file line 'Each bus may be driven by any number of generators and batteries.====' missing right side translation.
ERROR: language file line 'If you have more buses than generators or batteries, then you will need the cross-tie always on!====' missing right side translation.
ERROR: language file line ' goes to bus #====' missing right side translation.
ERROR: language file line 'max MP|(max POWER, redline RPM, sea level, ISA)====' missing right side translation.
ERROR: language file line 'spring k per unit mass lon, lat, vert| { ====' missing right side translation.
ERROR: language file line '#====#' missing right side translation.
ERROR: language file line ' { You may, optionally, assign a dataref for a switch in the sim to drive the slider, rather than having it driven by the but_command_slider switch. NOTE: YOU SHOULD PROBABLY START ASSIGNMENTS FROM #24 AND WORK DOWN, SINCE THE PRESENCE OF BUT_COMMAND_SLIDER BUTTONS ON THE PANEL WILL START AT THE FIRST SLIDER AND WORK UP!====' missing right side translation.
ERROR: language file line 'ELEMENT SPECS (ROOT AT LEFT, TIP AT RIGHT)====' missing right side translation.
ERROR: language file line 'shadow mode | { Controls which views this object casts shadows in. You may be able to improve framerate by limiting which objects cast shadows. For example, in an airliner with small windows there is probably no need to have the cabin seat objects cast shadows in an exterior view.====' missing right side translation.
ERROR: language file line '| hi-res { Check this to use higher texture resolution on this object. This is only recommended for objects that make up the cockpit instrument panel so the instruments are sharp!====' missing right side translation.
ERROR: language file line '| pre-fill { Check this to cause X-Plane to exclude clouds behind this object. Inside the 3-d cockpit blocking out clouds can significantly improve framerate. Only do this with fully opaque, cheap-to-draw objects. If you use a translucent objects the clouds will be missing through the translucency!====' missing right side translation.
ERROR: language file line '| use LOD { Check this to honor the LOD attributes in the OBJ. By default X-Plane ignores LOD on airplanes and draws them from any distance. Enable this to use LOD. Using low LODs on tiny details of your plane improves framerate in the far view; X-Plane will simply stop drawing those details when the plane is far away.====' missing right side translation.
ERROR: language file line 'roll input to engage|(ratio)====' missing right side translation.
ERROR: language file line 'aileron trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'elevator trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'rudder trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'rotor trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line '|aileron trim tab adjust { 0 is centered, -1.0 is for full left aileron, +1.0 is for right aileron.====' missing right side translation.
ERROR: language file line '|elevator trim tab adjust { 0 is centered, -1.0 is for full down elevator, +1.0 is for full up elvator.====' missing right side translation.
ERROR: language file line '|rudder trim tab adjust { 0 is centered, -1.0 is for full left rudder, +1.0 is for right rudder.====' missing right side translation.
ERROR: language file line ' minimum rudder deflection time|seconds { Enter 0.0 to be able to deflect the controls as fast as the pilot can move the stick or the art stab system can command a deflection, as is the case with all manual control systems. If the plane has a hydraulic system and a max rate of control deflection, though, enter how long it takes to go from center to fully-deflected here.====Minimale Seitenruder-Auslenkzeit|Sekunden { Geben Sie 0.0 ein, wenn die Steuerflächen unmittelbar der Steuereingabe des Piloten oder des Stabilisierungssystems folgen soll, wie es bei manuellen Steuersystemen der Fall ist. Wenn das Flugzeug jedoch ein Hydrauliksystem mit einer maximalen Auslenkgeschwindigkeit besitzt, geben Sie die Zeit ein, die für die Fahrt von der Mittelstellung bis zur vollen Auslenkung benötigt wird.' does not have the same leading spaces.
ERROR: language file line '-gear castors| { Just check here if you want this gear to free-castor. Enter the steering values above if you want it to steer.====-Fahrwerklaufrollen { Gegen Sie die Steuerungswerte oben ein, wenn Sie wollen, das es steuert. ' does not have the same trailing spaces.
ERROR: language file line 'additional gear flatplate area|(square feet) { X-Plane already considers the frontal area of struts, tires, and doors in its landing gear drag estimates. BUT, in real airplanes, there is ADDITIONAL drag from the gear WELLS disrupting the airflow over the craft. Enter the effective flatplate area here associated with that drag to increase the drag associated with landing gear deployment. A Beech Baron, for example, might have 2 square feet of effective frontal area from this effect. ====Zusätzlicher Flächenwiderstand|(Fuß²) { X-Plane bezieht grundsätzlich die Frontalfläche von Fahrwerkbeinen, Reifen und Schachttüren in die Berechnung des Luftwiderstands schon mit ein. Aber die Fahrwerksschächte erzeugen in der Realität zusätzlichen Widerstand, da sie den Fluss stören. Hier können Sie die äquivalente Fläche eingeben, die den Widerstand auf entsprechende Weise wie die Schachtöffnung bei ausgefahrenem Fahrwerk erhöhen würde. Eine Beech Baron kann z.B. 2 Quadrat-Fuß äquivalente Frontalfläche haben, die auf diesen Effekt zurückgeht.' does not have the same trailing spaces.
ERROR: language file line 'deflection when under zero load|==== Auslenkung unter Nulllast' does not have the same leading spaces.
ERROR: language file line '-tank #====Tank Nr. ' does not have the same trailing spaces.
ERROR: language file line 'Prop ====Propeller' does not have the same trailing spaces.
ERROR: language file line 'Misc Wing ====Diverse Flügel' does not have the same trailing spaces.
ERROR: language file line ' warhead type { Do you really need an explanation?====Sprengkopftyp { Brauchen Sie wirklich eine Erklärung?' does not have the same leading spaces.
ERROR: language file line 'coeff-20====' missing right side translation.
ERROR: language file line 'coeff-180====' missing right side translation.
ERROR: language file line 'finite-L/D====' missing right side translation.
ERROR: language file line 'AR|to use for L/D estimation at right and below====' missing right side translation.
ERROR: language file line 'e|to use for L/D estimation at right and below====' missing right side translation.
ERROR: language file line 'Departure ICAO should be blank when filing for a popup clearance.====' missing right side translation.
ERROR: language file line 'm====m' missing right side translation.
ERROR: language file line 'a multiplayer to plane #====einem(r) Mitspieler(in), Flugzeug Nr. ' does not have the same trailing spaces.
ERROR: language file line 'Above ====Oberhalb von' does not have the same trailing spaces.
ERROR: language file line 'G-units. We will try to give you this G-load by moving the pitch controls ====G-Faktor. Dieser wird durch Bewegung des Höhenruders nachgeahmt' does not have the same trailing spaces.
ERROR: language file line ' ailn-elev-rudd====Quer-/Höhen-/Seitenruder' does not have the same leading spaces.
ERROR: language file line 'www.X-Plane.com for tech support contact info!==== Besuchen Sie bei Problemen www.X-Plane.com!' does not have the same leading spaces.
Initializing off screen memory.
Initializing off screen memory complete.
I found the following scenery packages (prioritized in this order):
0 Custom Scenery/LOWI Demo Area/ (disabled)
1 Custom Scenery/Aerosoft - EBBR Brussels/
2 Custom Scenery/Aerosoft - EDDF Frankfurt/
3 Custom Scenery/Aerosoft - EDDT Berlin Tegel/
4 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/
5 Custom Scenery/Aerosoft - EGBB Birmingham/
6 Custom Scenery/Aerosoft - EGKK London-Gatwick/
7 Custom Scenery/Aerosoft - EGLL Heathrow/
8 Custom Scenery/Aerosoft - EGPF Glasgow/
9 Custom Scenery/Aerosoft - EGSS London-Stansted/
10 Custom Scenery/Aerosoft - LEBL Barcelona/
11 Custom Scenery/Aerosoft - LEMD Madrid/
12 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/
13 Custom Scenery/Aerosoft - LFPG Paris CDG/
14 Custom Scenery/Aerosoft - LFPO Paris Orly/
15 Custom Scenery/Aerosoft - LPFR Faro/
16 Custom Scenery/Aerosoft - LSGG Genf/
17 Custom Scenery/Global Airports/
18 Custom Scenery/KSEA Demo Area/
19 Custom Scenery/KSEA Demo Terrain/
20 Custom Scenery/LOWI/
21 Custom Scenery/LOWS/
22 Custom Scenery/LOWW/
23 Custom Scenery/LIRF/
24 Custom Scenery/Seasons_assets/
25 Custom Scenery/Seasons_N_Autumn/
26 Custom Scenery/Seasons_N_Winter1/
27 Custom Scenery/Seasons_N_Winter2/
28 Custom Scenery/Seasons_S_Autumn/
29 Custom Scenery/Seasons_S_Winter/
30 Custom Scenery/Osm_Europe/
31 Custom Scenery/Urban_Maxx_Extreme_V2_3D/
32 Custom Scenery/Europe_Library/
33 Custom Scenery/ff_library/
34 Custom Scenery/R2_Library/
35 Custom Scenery/OpenSceneryX/
36 Custom Scenery/zzz_Treelines_Farms_Europe_v2/
37 Global Scenery/Bug Fixes/
38 Global Scenery/Recuts 1030/
39 Global Scenery/X-Plane 10 Global Scenery/
40 Resources/default scenery/1000 autogen/
41 Resources/default scenery/1000 decals/
42 Resources/default scenery/1000 forests/
43 Resources/default scenery/1000 roads/
44 Resources/default scenery/1000 urban terrain/
45 Resources/default scenery/1000 world terrain/
46 Resources/default scenery/700 roads/
47 Resources/default scenery/900 beaches/
48 Resources/default scenery/900 europe objects/
49 Resources/default scenery/900 forests/
50 Resources/default scenery/900 roads/
51 Resources/default scenery/900 us objects/
52 Resources/default scenery/900 world object placeholders/
53 Resources/default scenery/airport decals/
54 Resources/default scenery/airport scenery/
55 Resources/default scenery/default apt dat/
56 Resources/default scenery/default atc/
57 Resources/default scenery/sim objects/

0:00:00.000 D/HID: HID Bridge Running
Fetching plugins for Custom Scenery/LOWI/plugins

Loaded: Custom Scenery/LOWI/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.LOWI).

Fetching plugins for Custom Scenery/LOWS/plugins

Loaded: Custom Scenery/LOWS/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.LOWS).

Fetching plugins for Custom Scenery/LIRF/plugins

Loaded: Custom Scenery/LIRF/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.LIRF).

Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 28 name = 1
(in sign '{@y,^l}L{@l}EXIT_1{@y}L{^r}' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 28 name = 1
(in sign '{@y,^l}L{@l}EXIT_1{@y}L{^r}' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 29 name = 2
(in sign '{@y,^l}L{@l}EXIT_2{@y}L{^r}' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 29 name = 2
(in sign '{@y,^l}L{@l}EXIT_2{@y}L{^r}' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 30 name = 3
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 30 name = 3
(in sign '{@y,^l}L{@l}EXIT_3{@y}C{^u}|L{^r,@@,@l}EXIT_3{@y}L{^r}|EXIT_2{^r}' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 30 name = 3
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 30 name = 3
(in sign '{@y,^l}L|C{^u,@l}EXIT_3{@y}L{^r,@@,@y,^l}EXIT_4|L{^r,@l}EXIT_3' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 31 name = 4
(in sign '{@y,^l}L{@l}EXIT_4{@y}L{^r}' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 31 name = 4
(in sign '{@y,^l}L{@l}EXIT_4{@y}L{^r}' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 31 name = 4
(in sign '{@l}EXIT_4' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
Warning: illegal space found after glyph 20 name = T
Warning: illegal space found before glyph 31 name = 4
(in sign '{@l}EXIT_4' from airport LOWS:Custom Scenery/LOWS/Earth nav data/apt.dat)
ATC audio initialized.
0:00:00.000 I/REN: Setting |draw view indicator read from prefs as 1.
0:00:00.000 I/REN: Setting |dim under high G-load or hypoxia read from prefs as 1.
0:00:00.000 I/REN: Setting |draw hi-res planet textures from orbit read from prefs as 1.
0:00:00.000 I/REN: Setting |draw forest fires and balloons read from prefs as 0.
0:00:00.000 I/REN: Setting |draw birds and deer in nice weather read from prefs as 0.
0:00:00.000 I/REN: Setting |draw aircraft carriers and frigates read from prefs as 0.
0:00:00.000 I/REN: Setting |draw Aurora Borealis read from prefs as 0.
0:00:00.000 I/REN: Setting |number of trees read from prefs as 1.
0:00:00.000 I/REN: Setting |number of objects read from prefs as 3.
0:00:00.000 I/REN: Setting |number of roads read from prefs as 2.
0:00:00.000 I/REN: Setting |number of cars read from prefs as 1.
0:00:00.000 I/REN: Setting |world detail distance read from prefs as 2.
0:00:00.000 I/REN: Setting |airport detail read from prefs as 2.
0:00:00.000 I/REN: Setting |water reflection detail read from prefs as 2.
0:00:00.000 I/REN: Setting compress textures to save VRAM read from prefs as 1.
0:00:00.000 I/REN: Setting |runways follow terrain contours read from prefs as 0.
0:00:00.000 I/REN: Setting |draw volumetric fog read from prefs as 1.
0:00:00.000 I/REN: Setting |draw per pixel lighting read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR rendering read from prefs as 1.
0:00:00.000 I/REN: Setting |shadow detail read from prefs as 1.
0:00:00.000 I/REN: Setting |atmospheric scattering read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR anti-aliasing read from prefs as 1.
0:00:00.000 I/REN: Setting |3-D bump-maps read from prefs as 1.
0:00:00.000 I/REN: Setting |gritty detail textures read from prefs as 1.
0:00:00.000 I/REN: Setting |Extended DSF Scenery read from prefs as 1.
0:00:00.000 I/NET: LAN-Verbindung 192.168.0.22
0:00:00.000 I/NET: VirtualBox Host-Only Network 192.168.56.1
0:00:00.000 I/NET: Ethernet 192.168.201.1
0:00:00.000 I/NET: Ethernet 2 192.168.32.1
0:00:00.000 D/State: Received: 0:0
0:00:00.000 D/HID: Hardware ADDED(06a3, 0762) - Saitek X52 Pro Flight Control System at path ?\hid#vid_06a3&pid_0762#7&36da30e1&3&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: Saitek X52 Pro Flight Control System - VID:1699PID:1890, this is a familiar device.
0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 8 (0009, 0009) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 9 (0009, 000a) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 10 (0009, 000b) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 11 (0009, 000c) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 12 (0009, 000d) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 13 (0009, 000e) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 14 (0009, 000f) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 15 (0009, 0010) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 16 (0009, 0011) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 17 (0009, 0012) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 18 (0009, 0013) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 19 (0009, 0014) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 20 (0009, 0015) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 21 (0009, 0016) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 22 (0009, 0017) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 23 (0009, 0018) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 24 (0009, 0019) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 25 (0009, 001a) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 26 (0009, 001b) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 27 (0009, 001c) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 28 (0009, 001d) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 29 (0009, 001e) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 30 (0009, 001f) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 31 (0009, 0020) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 32 (0009, 0021) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 33 (0009, 0022) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 34 (0009, 0023) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 35 (0009, 0024) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 36 (0009, 0025) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 37 (0009, 0026) for handle: 0x90069270
0:00:00.000 D/HID: BUTTON Added Index: 38 (0009, 0027) for handle: 0x90069270
0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0031) for handle: 0x90069270. Min/Max 0 - 1023
0:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0030) for handle: 0x90069270. Min/Max 0 - 1023
0:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0035) for handle: 0x90069270. Min/Max 0 - 1023
0:00:00.000 D/HID: AXIS Added Index: 3 (0001, 0036) for handle: 0x90069270. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 4 (0001, 0034) for handle: 0x90069270. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 5 (0001, 0033) for handle: 0x90069270. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 6 (0001, 0032) for handle: 0x90069270. Min/Max 0 - 255
0:00:00.000 D/HID: HATSWITCH Added Index: 0 (0001, 0039) for handle: 0x90069270. It has 8 positions.
0:00:00.000 D/HID: AXIS Added Index: 7 (0005, 0026) for handle: 0x90069270. Min/Max 0 - 15
0:00:00.000 D/HID: AXIS Added Index: 8 (0005, 0024) for handle: 0x90069270. Min/Max 0 - 15
0:00:00.000 D/HID: END HARDWARE
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek X52 Pro Flight Control System - VID:1699PID:1890 Axis #7: device min/max (0.000000 - 15.000000) calib (0.000000 - 0.600000)
0:00:00.000 D/HID: Hardware ADDED(045e, 028e) - Controller (XBOX 360 For Windows) at path ?\hid#vid_045e&pid_028e&ig_00#8&340e285e&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: Controller (XBOX 360 For Windows) - VID:1118PID:654, this is a familiar device.
0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 8 (0009, 0009) for handle: 0x90068010
0:00:00.000 D/HID: BUTTON Added Index: 9 (0009, 000a) for handle: 0x90068010
0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0031) for handle: 0x90068010. Min/Max 0 - 65535
0:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0030) for handle: 0x90068010. Min/Max 0 - 65535
0:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0034) for handle: 0x90068010. Min/Max 0 - 65535
0:00:00.000 D/HID: AXIS Added Index: 3 (0001, 0033) for handle: 0x90068010. Min/Max 0 - 65535
0:00:00.000 D/HID: AXIS Added Index: 4 (0001, 0032) for handle: 0x90068010. Min/Max 0 - 65535
0:00:00.000 D/HID: HATSWITCH Added Index: 0 (0001, 0039) for handle: 0x90068010. It has 8 positions.
0:00:00.000 D/HID: END HARDWARE
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Controller (XBOX 360 For Windows) - VID:1118PID:654 Axis #0: device min/max (0.000000 - 65535.000000) calib (0.499992 - 0.499992)
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Controller (XBOX 360 For Windows) - VID:1118PID:654 Axis #1: device min/max (0.000000 - 65535.000000) calib (0.500008 - 0.500008)
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Controller (XBOX 360 For Windows) - VID:1118PID:654 Axis #2: device min/max (0.000000 - 65535.000000) calib (0.499992 - 0.499992)
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Controller (XBOX 360 For Windows) - VID:1118PID:654 Axis #3: device min/max (0.000000 - 65535.000000) calib (0.500008 - 0.500008)
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Controller (XBOX 360 For Windows) - VID:1118PID:654 Axis #4: device min/max (0.000000 - 65535.000000) calib (0.500008 - 0.500008)
0:00:01.868 I/ACF: Loading airplane number 0 with Aircraft/Heavy Metal/SSGE-170LR_XP10V2/SSGE-170LRXP10v2.acf

Gizmo64: Aircraft Changed..
Gizmo64: Aircraft name: (SSGE-170LRXP10v2.acf)
Gizmo64: Aircraft path: (Z:/X-Plane 10/Aircraft/Heavy Metal/SSGE-170LR_XP10V2/)

Gizmo64: gizmo_Restart()
Gizmo64: Shutting down Lua VM
Gizmo64: Releasing X-Plane overrides: sim/operation/override/*
Gizmo64: Reboot count: 0
Gizmo64: OpenAL: Using shared OpenAL context..
Gizmo64: Machine ID:(6a9bac8d59a6c66187f44985c411ea4b)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (Z:/X-Plane 10/Aircraft/Heavy Metal/SSGE-170LR_XP10V2/plugins/EZ-DRM/Icon.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (Z:/X-Plane 10/Aircraft/Heavy Metal/SSGE-170LR_XP10V2/CRJ200_icon.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (Z:/X-Plane 10/Resources/plugins/MaxxFX/product_registration.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (Z:/X-Plane 10/Resources/plugins/SoundMaxx/product_registration.png)
Gizmo64: gizmo_loadPngImage(...): Failed: 404: (Z:/X-Plane 10/Resources/plugins/SeasonsXP/product_registration.png)
Gizmo64: LoadFirmware() completed.
Gizmo64: Aircraft Author: Ricardo Bolognini and SSG- Supercritical-Simulations Group
Gizmo64: Aircraft Descrip: Embraer 170LR
Gizmo64: Could not find ./scripts/deployment.key
Gizmo64: Community Edition.
Gizmo64: LuaVM: OnKickStart()
Gizmo64: Completed gizmo_Restart

Fetching plugins for Z:\X-Plane 10/Aircraft/Heavy Metal/SSGE-170LR_XP10V2/plugins

SASL: Starting...
X-Plane scriptable avionics library plugin v2.0.1
Loaded: Z:\X-Plane 10/Aircraft/Heavy Metal/SSGE-170LR_XP10V2/plugins/sasl/64/win.xpl (1-sim.sasl).

SASL: Path to panel: Z:\X-Plane 10\Aircraft\Heavy Metal\SSGE-170LR_XP10V2\avionics.lua
SASL: Loading avionics...
SASL INFO: loading panel
SASL INFO: loading protections
SASL INFO: loading apu
SASL INFO: loading start
SASL INFO: loading Vspeeds
SASL INFO: Avionics loaded
0:00:01.868 I/FLT: Init dat_p0 type:loc_ram apt:LOWI rwy:08
0:00:01.868 I/SCN: DSF load time: 443495 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+46+011.dsf (0 tris)
0:00:01.868 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Vintage_Airports/Control_Towers/'.
0:00:01.868 I/SCN: DSF load time: 259355 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+46+011.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 968382 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+46+009.dsf (0 tris)
0:00:01.868 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/'.
0:00:01.868 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Modern_Airports/Control_Towers/'.
0:00:01.868 I/SCN: DSF load time: 140649 for file Custom Scenery/Osm_Europe/Earth nav data/+40+000/+46+009.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 106490 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+000/+46+009.dsf (0 tris)
0:00:01.868 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/'.
0:00:01.868 E/SCN: Failed to find resource 'test/AGtrees_test.for', referenced from file 'Resources/default scenery/airport scenery/Modern_Airports/Control_Towers/'.
0:00:01.868 I/SCN: DSF load time: 1656786 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+48+009.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 1575298 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+48+011.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 966842 for file Custom Scenery/Osm_Europe/Earth nav data/+40+000/+48+009.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 979848 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+48+011.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 579909 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+000/+48+009.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 940350 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+48+011.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 14935023 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+46+011.dsf (1351285 tris)
0:00:01.868 I/SCN: DSF load time: 14523297 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+000/+46+009.dsf (1439852 tris)
0:00:01.868 I/SCN: DSF load time: 15305206 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+48+011.dsf (1172526 tris)
0:00:01.868 I/SCN: DSF load time: 19360098 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+000/+48+009.dsf (1126807 tris)
0:00:01.868 I/SCN: DSF load time: 1223 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+46+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 24603 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+48+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 92070 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+46+010.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 29197 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+46+010.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 304933 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+46+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 304804 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+48+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 58656 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+46+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 370268 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+48+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 12577130 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+46+010.dsf (1341092 tris)
0:00:01.868 I/SCN: DSF load time: 13574595 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+46+012.dsf (1487041 tris)
0:00:01.868 I/SCN: DSF load time: 13319300 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+48+012.dsf (1117197 tris)
0:00:01.868 I/SCN: DSF load time: 3051 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+47+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 193903 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+48+010.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 560895 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+48+010.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 876458 for file Custom Scenery/LOWS/Earth nav data/+40+010/+47+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 279887 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+47+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 175836 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+47+012.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 807564 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+48+010.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 13354846 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+012.dsf (1308151 tris)
0:00:01.868 I/SCN: DSF load time: 15278947 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+48+010.dsf (1156777 tris)
0:00:01.868 I/SCN: DSF load time: 4112 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+47+011.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 49765 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+47+009.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 485642 for file Custom Scenery/Osm_Europe/Earth nav data/+40+000/+47+009.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 295391 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+000/+47+009.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 1099773 for file Custom Scenery/LOWI/Earth nav data/+40+010/+47+011.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 276187 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+47+011.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 107311 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+47+011.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 13578456 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+010/+47+011.dsf (1320883 tris)
0:00:01.868 I/SCN: DSF load time: 15821067 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40+000/+47+009.dsf (1223516 tris)
0:00:01.868 I/SCN: DSF load time: 30429 for file Custom Scenery/Global Airports/Earth nav data/+40+010/+47+010.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 369161 for file Custom Scenery/Osm_Europe/Earth nav data/+40+010/+47+010.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 186843 for file Custom Scenery/zzz_Treelines_Farms_Europe_v2/Earth nav data/+40+010/+47+010.dsf (0 tris)
0:00:01.868 I/SCN: DSF load time: 4338949 for file Global Scenery/Recuts 1030/Earth nav data/+40+010/+47+010.dsf (329328 tris)
FlyWithLua: User switched to a new airport (or changed the plane). Script files have to be reloaded.
FlyWithLua Info: Lua engine (re)started. LUA_RUN = 1, SDK_VERSION = 210, XPLANE_VERSION = 10450, XPLANE_LANGUAGE = German and XPLANE_HOSTID = 1
FlyWithLua Info: HID access initialized.
FlyWithLua Info: Discovered 14 HID devices.
FlyWithLua Info: Load ini file.
FlyWithLua Info: Searching for Lua script files
FlyWithLua Info: Sorting Lua script files
FlyWithLua Info: All script files loaded successfully.
FlyWithLua Info: Loading time for all scripts is 0.031 sec.
0:02:02.845 D/State: Received: 0:6
Z:\X-Plane 10\Resources\plugins\XFMC\Textures\xfmc_0_lit.png

Gizmo64: OpenGL<->Physics Offset Default Init: 26662.676, 470.352, 26831.959
Gizmo64: Tried to use physics engine without loading an OBJ8 file. Ignored, can't draw!
SkyMaxx Pro: Memory Check: 119040 KB GPU, 8894264 KB CPU
SkyMaxx Pro: Location set to lat 47.258350 lon 11.352904 alt 584.329211
SkyMaxx Pro: Changing cloud conditions.
SkyMaxx Pro: Created cirrus layer alt 9000.000000 thickness 0.000000
SkyMaxx Pro: Cloud conditions changed. Current target visibility is 100.000000
SkyMaxx Pro: Changing cloud conditions.
SkyMaxx Pro: Created cumulus congestus layer alt 3019.000000 size 132895.000000 density 0.500000
SkyMaxx Pro: Created cumulus congestus layer alt 7315.000000 size 132895.000000 density 0.666667
SkyMaxx Pro: Created cirrus layer alt 9000.000000 thickness 0.000000
SkyMaxx Pro: Cloud conditions changed. Current target visibility is 27986.000000
SkyMaxx Pro: Memory Check: 136640 KB GPU, 8580108 KB CPU
SkyMaxx Pro: Memory Check: 136640 KB GPU, 8634800 KB CPU
SkyMaxx Pro: Memory Check: 136640 KB GPU, 8634292 KB CPU
Z:\X-Plane 10\Resources\plugins\XFMC\Textures\xfmc_0_lit.png

Z:\X-Plane 10\Resources\plugins\XFMC\Textures\xfmc_0_lit.png

0:06:02.552 I/ATC: Airport flow changed at ED01!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing ED01 CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at ED01. Advancing...
0:06:02.552 I/ATC: Changing ED01 CabState from 1 to 2
0:06:02.552 I/ATC: All arrivals are done at ED01. Advancing...
0:06:02.552 I/ATC: Changing ED01 CabState from 2 to 0
0:06:02.552 I/ATC: Airport flow changed at ETHA!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing ETHA CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at ETHA. Advancing...
0:06:02.552 I/ATC: Changing ETHA CabState from 1 to 2
0:06:02.552 I/ATC: All arrivals are done at ETHA. Advancing...
0:06:02.552 I/ATC: Changing ETHA CabState from 2 to 0
0:06:02.552 I/ATC: Airport flow changed at EDNH!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing EDNH CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at EDNH. Advancing...
0:06:02.552 I/ATC: Changing EDNH CabState from 1 to 2
0:06:02.552 I/ATC: All arrivals are done at EDNH. Advancing...
0:06:02.552 I/ATC: Changing EDNH CabState from 2 to 0
0:06:02.552 I/ATC: Airport flow changed at EDMB!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing EDMB CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at EDMB. Advancing...
0:06:02.552 I/ATC: Changing EDMB CabState from 1 to 2
0:06:02.552 I/ATC: All arrivals are done at EDMB. Advancing...
0:06:02.552 I/ATC: Changing EDMB CabState from 2 to 0
0:06:02.552 I/ATC: Airport flow changed at EDMD!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing EDMD CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at EDMD. Advancing...
0:06:02.552 I/ATC: Changing EDMD CabState from 1 to 2
0:06:02.552 I/ATC: All arrivals are done at EDMD. Advancing...
0:06:02.552 I/ATC: Changing EDMD CabState from 2 to 0
0:06:02.552 I/ATC: Airport flow changed at ED02!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing ED02 CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at ED02. Advancing...
0:06:02.552 I/ATC: Changing ED02 CabState from 1 to 2
0:06:02.552 I/ATC: All arrivals are done at ED02. Advancing...
0:06:02.552 I/ATC: Changing ED02 CabState from 2 to 0
0:06:02.552 I/ATC: Airport flow changed at EDMI!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing EDMI CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at EDMI. Advancing...
0:06:02.552 I/ATC: Changing EDMI CabState from 1 to 2
0:06:02.552 I/ATC: All arrivals are done at EDMI. Advancing...
0:06:02.552 I/ATC: Changing EDMI CabState from 2 to 0
0:06:02.552 I/ATC: Airport flow changed at LOWI!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing LOWI CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at LOWI. Advancing...
0:06:02.552 I/ATC: Changing LOWI CabState from 1 to 2
0:06:02.552 I/ATC: All arrivals are done at LOWI. Advancing...
0:06:02.552 I/ATC: Changing LOWI CabState from 2 to 0
0:06:02.552 I/ATC: Airport flow changed at EDMJ!
CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South
0:06:02.552 I/ATC: Changing EDMJ CabState from 0 to 1
0:06:02.552 I/ATC: All departures are done at EDMJ. Advancing...
0