Plan History missing Load kWh data for current day - Causing stale history data?

[gittykrabs]

My Plan History is always missing Load kWh data for the current days. It just shows each entry as 0 and it seems to start at 06:30 each morning. My logs are also full of " Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data". I cannot figure out why this is happening. Is it perhaps something to do with load_today? You can see from the screenshot that history before the current day appears to populate just fine. Here's some logs as well:

48387 | 2026-03-09 15:35:04.849326:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
48230 | 2026-03-09 15:30:05.471994:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
47933 | 2026-03-09 15:25:04.486884:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
47776 | 2026-03-09 15:20:05.069653:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
47457 | 2026-03-09 15:15:04.895480:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
47300 | 2026-03-09 15:10:04.514373:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
47005 | 2026-03-09 15:05:04.457157:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
46848 | 2026-03-09 15:00:05.212521:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
46553 | 2026-03-09 14:55:04.485170:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
46396 | 2026-03-09 14:50:05.238794:  Warn: Found 1 gaps in load_today totalling 40 minutes to fill using average data
46035 | 2026-03-09 14:45:04.933439:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
45878 | 2026-03-09 14:40:04.526623:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
45583 | 2026-03-09 14:35:04.406229:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
45426 | 2026-03-09 14:30:05.159168:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
45129 | 2026-03-09 14:25:05.181683:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
44972 | 2026-03-09 14:20:04.941013:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
44653 | 2026-03-09 14:15:04.750948:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
44496 | 2026-03-09 14:10:05.322572:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
44201 | 2026-03-09 14:05:05.228459:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
44044 | 2026-03-09 14:00:05.158526:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data
43747 | 2026-03-09 13:55:04.571997:  Warn: Found 1 gaps in load_today totalling 50 minutes to fill using average data

[gcoan]

since predbat is reporting a problem with your load_today sensor, it would be helpful to any diagnosis if you showed us what was in the sensor, and included details of your configuration as per the template

[gittykrabs]

since predbat is reporting a problem with your load_today sensor, it would be helpful to any diagnosis if you showed us what was in the sensor, and included details of your configuration as per the template

Thank you for the reply @gcoan . Apologies as I am new to posting in Github and find it a bit confusing to navigate to be honest! Is there a template I should be using to post specific configs here?

I am using the Docker version of Predbat and HA. I'm using a a 3.68 kW Sigenergy inverter, and I am using rhe Sigenergy template, with some changes. For load_today, I am using:

load_today:

• sensor.sigen_plant_daily_load_consumption

This sensor resets to 0 at midnight each day, and it's in the default template, so it should be correct? Thanks!

[gcoan]

If you use the standard github template for predbat it asks for a number of things which give us some hope of being able to identify what your problem is, without these, its very much fishing in the dark.

The full logfile, not just a few lines
Your apps.yaml
The predbat plan
Debug file

You can get these from the predbat web console.

Thanks for saying what inverter and template you have used, again, this is in the github issue template, and without it, difficult to diagnose.

I am using rhe Sigenergy template, with some changes

"some changes" could be anything, you might have broken something, or misconfigured it. Again, hard to tell.

As I suggested, would like to see your load_today sensor, sensor.sigen_plant_daily_load_consumption, so please copy/paste a graph showing the sensor for the last 48 hours. It might be the default in the sigenergy template but if there is a problem with it, then that could cause your issue.

I don't see any such issues with my plan history which suggests it is a problem with your configuration or inverter

[gittykrabs]

Thanks again @gcoan for taking the time to reply to me. Sorry for the delay. I've attached the files from the debug section below. Note that I just added load_power_fill_enable: True a few hours ago but it does not seem to have made any difference. Do you have a Sigenstor system as well? I got mine about a month ago and I feel Predbat is an absolute must! Thanks!

apps.yaml.txt
predbat.log
predbat_debug.yaml.txt
predbat_plan.html

[gittykrabs]

Could this be the same issue? #3524

[gittykrabs]

@gcoan any idea what could be wrong here? Every single day now, my history shows Load kWh 0 for the current day and I get the following error message when clicking on Pan History

Plan data is stale (Last updated >15 minutes ago)

These are my 'Today' sensors

  load_today:
  - sensor.sigen_plant_total_load_consumption
  load_power_fill_enable: true

They all seem to be accumulating data in HA. I have no idea what is causing this. Thanks!