diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index b66bbdc561d0..13b5f981dd6d 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -255,6 +255,16 @@
 		};
 	};
 
+	vdd_micro_usb_vbus: regulator-micro-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "MICRO_USB_VBUS";
+		gpio = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -286,6 +296,31 @@
 		regulator-enable-ramp-delay = <10000>;
 	};
 
+	usb2-connector {
+		compatible = "gpio-usb-b-connector",
+			     "usb-b-connector";
+			label = "micro-USB";
+			type = "micro";
+			id-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+			vbus-gpios = <&pm7325_gpios 9 GPIO_ACTIVE_HIGH>;
+			vbus-supply = <&vdd_micro_usb_vbus>;
+			pinctrl-0 = <&usb2_id_detect>;
+			pinctrl-names = "default";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb2_connector_ep: endpoint {
+						remote-endpoint = <&usb2_controller_ep>;
+					};
+				};
+			};
+	};
+
 	wcn6750-pmu {
 		compatible = "qcom,wcn6750-pmu";
 		pinctrl-0 = <&bt_en>;
@@ -1646,6 +1681,12 @@
 		 */
 		bias-pull-up;
 	};
+
+	usb2_id_detect: usb2-id-detect-state {
+		pins = "gpio61";
+		function = "gpio";
+		bias-pull-up;
+	};
 };
 
 &uart5 {
@@ -1709,6 +1750,31 @@
 	status = "okay";
 };
 
+&usb_2 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb2_controller_ep: endpoint {
+				remote-endpoint = <&usb2_connector_ep>;
+			};
+		};
+	};
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+
+	status = "okay";
+};
+
 &usb_dp_qmpphy_out {
 	remote-endpoint = <&redriver_phy_con_ss>;
 };