cartographer v4 0dysseusRex mount override

[pellcorp]

https://www.printables.com/model/1524366-k1-cartographer-v4-mount

k1
k1m

[0dysseusRex]

For the sake of making it easier to spell for folks it's probably a good idea to just call it the Rex mount in the wiki/config lol

[pellcorp]

To be fair they can easily copy and paste

[jason-adnuntius]

For the sake of making it easier to spell for folks it's probably a good idea to just call it the Rex mount in the wiki/config lol

Do you have access to users cartographer config for k1 and k1m for things like bed mesh, screw tilt, etc? Cos otherwise thats going to be me guessing.

[0dysseusRex]

For the sake of making it easier to spell for folks it's probably a good idea to just call it the Rex mount in the wiki/config lol

Do you have access to users cartographer config for k1 and k1m for things like bed mesh, screw tilt, etc? Cos otherwise thats going to be me guessing.
I have access to my own, I guess? My k1m is heavily modified, however, so my settings wouldn't help you out. The Simple AF installer takes care of installing all the required files. After that, you just run your calibrations. Everything is mostly done for you. At most, you might have to mess with the bed scan min/max. Just follow the Simple AF setup instructions from the wiki. You can join the discord for help if you have specific questions.

[pellcorp]

For the sake of making it easier to spell for folks it's probably a good idea to just call it the Rex mount in the wiki/config lol

Do you have access to users cartographer config for k1 and k1m for things like bed mesh, screw tilt, etc? Cos otherwise thats going to be me guessing.
I have access to my own, I guess? My k1m is heavily modified, however, so my settings wouldn't help you out. The Simple AF installer takes care of installing all the required files. After that, you just run your calibrations. Everything is mostly done for you. At most, you might have to mess with the bed scan min/max. Just follow the Simple AF setup instructions from the wiki. You can join the discord for help if you have specific questions.

such an odd response to send to me :-)

So what I want is the equivalent of:

https://github.com/pellcorp/creality/blob/main/mounts/cartographer/D3vilStock-k1.overrides
https://github.com/pellcorp/creality/blob/main/mounts/cartographer/D3vilStock-k1m.overrides

These files are what Simple AF uses to setup the correct stuff for each mount, and those have to be figured out, so you said lots of people use your mount, do you know if there are people who have it on a basically stock k1 and k1m who could share their config, even the config overrides so I can see how they tweaked the install.

Cos they must have chosen a different --mount initially and then customised it for your mount?

[pellcorp]

Ah jason-adnuntius fuck is my work user ha

[0dysseusRex]

Ah jason-adnuntius fuck is my work user ha

Oh, I was so confused as to who this Jason was and what he was asking LMAO. My instructions for installation were to simply start the setup of their cartographer by selecting the Default mount during setup and then just changing the X offset to -18. My own k1m config is

[cartographer]
x_offset: -18.0
y_offset: 0.0

[bed_mesh]
mesh_min: 30,14
mesh_max: 285,280
probe_count: 40,40

[screws_tilt_adjust]
screw1: 35,23
screw2: 294,23
screw3: 264,272
screw4: 64,272

Which is a little wonky for reasons like I have a wiper at the back. I never thought to ask anyone for their configs, though. I'll ask around.

[pellcorp]

i have limited time and I don't really want to merge something that could cause damage or out of range errors