Extension for TTL 15 AS

[Zeusur]

Helo together,

I have a Tecalore TTL 15 AS as heat pump and the WPM.

I only got the outside temperature.

Here is my log with verbose logging:

logs_esp32-poe-technik_logs.txt

Wifi and security deleted in log.

wpl13 active

[Zeusur]

I found out, that my setup has other CAN ID.
I mostly have ID 0x500 and ID 0x480.

I have configured the code.

The next days I will try to reengineer my Data because they also different. I got a lot of UNKNOWN Data.

[Zeusur]

I found out, that my setup has other CAN ID. I mostly have ID 0x500 and ID 0x480.

I have configured the code.

The next days I will try to reengineer my Data because they also different. I got a lot of UNKNOWN Data.

With change of Target in my yaml the most Data I got.

[kr0ner]

so changing manager_can_id: "0x514" to "0x500" solved the issue?

CAN Source ID Elster Index (Hex) Decoded Value (Raw) Physical State (Scaled) Inferred Property / Sensor Definition Data Type
0x180 (Kessel) 0x000c 59 5.9 °C AUSSENTEMP (Outside Temperature) et_dec_val
0x500 (Heizmodul) 0x01d6 271 27.1 °C VORLAUFTEMP (Flow Temperature) et_dec_val
0x500 (Heizmodul) 0x0016 237 23.7 °C RUECKLAUFTEMP (Return Temperature) et_dec_val
0x500 (Heizmodul) 0x0265 281 28.1 °C HEISSGAS_TEMP (Hot Gas Temperature) et_dec_val
0x500 (Heizmodul) 0x0a39 366 36.6 °C OELSUMPFTEMP (Oil Sump Temperature) et_dec_val
0x500 (Heizmodul) 0x0a37 189 18.9 °C VERFLUESSIGER_TEMP (Condenser Temperature) et_dec_val
0x500 (Heizmodul) 0x07a6 1137 11.37 bar DRUCK_HOCHDRUCK (High Pressure Circuit) et_cent_val
0x500 (Heizmodul) 0x07a7 994 9.94 bar DRUCK_NIEDERDRUCK (Low Pressure Circuit) et_cent_val
0x500 (Heizmodul) 0x06b1 2240 224.0 V SPANNUNG_INVERTER (Inverter Voltage) et_dec_val
0x500 (Heizmodul) 0x06b2 0 0.0 A STROM_INVERTER (Inverter Current) et_dec_val
0x500 (Heizmodul) 0x091a 335 335 Wh EL_ENERGIEAUFNAHME_WW_TAG_WH Integer
0x500 (Heizmodul) 0x091b 1 1 kWh EL_ENERGIEAUFNAHME_WW_TAG_KWH Integer
0x500 (Heizmodul) 0x091e 967 967 Wh EL_ENERGIEAUFNAHME_HEIZ_TAG_WH Integer
0x500 (Heizmodul) 0x091f 4 4 kWh EL_ENERGIEAUFNAHME_HEIZ_TAG_KWH Integer
0x500 (Heizmodul) 0x092e 930 930 Wh WAERMEERTRAG_HEIZ_TAG_WH Integer
0x500 (Heizmodul) 0x092f 15 15 kWh WAERMEERTRAG_HEIZ_TAG_KWH Integer
0x500 (Heizmodul) 0x092a 807 807 Wh WAERMEERTRAG_WW_TAG_WH Integer
0x500 (Heizmodul) 0x092b 3 3 kWh WAERMEERTRAG_WW_TAG_KWH Integer

[kr0ner]

@Zeusur could you figure out why it did not work?

[Zeusur]

Yes.
I was working on it the last days.

I added the new Can ID and reengineered all massages I got.

I habe 32 "temperatur sensor" which are not definied. I also have checked the elster table.

I try to work on it every evening 1-2 hours.

My work is Quick and dirty at this moment and I try to clean it update parallel.

If you wish I can share you something.

[kr0ner]

That would be great, so that I can already think of how to mainline it :)

[Zeusur]

That would be great, so that I can already think of how to mainline it :)

This should be no problem.

1. I added my messages in property.h below.
2. I added my CANMember ID in communication.h
3. I added ttl_15AS.yaml

But I am still on debug but it works.

Maybe I can branch my solution out but I have to clean a little bit. I also have to link some massages to other ID.

I added a log to show you the massages and values. Maybe the wrong type.

logs_esp32-poe-technik_logs.txt

I see a lot of 32.768. I think this is something else.

Sensoren
ABTAUUNGAKTIV
0
ACCESS_EEPROM
32.768
ANFAHRENT
32.768
ANZAHL_STARTVERSUCHE
0
ANZEIGE_MITTELDRUCK
102,10 bar
AUSSENTEMP
7,9 °C
BETRIEBSART_WP
0
BUSKONTROLLE
32.768
DRUCK_HOCHDRUCK
11,00 bar
DRUCK_NIEDERDRUCK
10,07 bar
EVU_SPERRE_AKTIV
1
EXV_OEFFNUNGSGRAD
0
EXV_OEFFNUNGSGRAD_ZWISCHENEINSPRITZUNG
0
FATAL_ERROR
0
FEHLER_PARAMETERSATZ_IWS
0
FEHLERART
0
FIRMWARE_VERSION
0,16
GERAETE_ID
37.648
GERAETEKONFIGURATION
32.768
HARDWARE_NUMMER
32.768
HEISSGAS_TEMP
25,7 °C
HKISTTEMP
27,4 °C
HKSOLLTEMP
29,2 °C
INITIALISIERUNG
256
INTEGRAL_REGELABWEICHUNG_RELATIV
65.461
ISTWERT_UEBERHITZUNG_VERDAMPFER
156
K_OS_RMX_RESERVE_INFO3
8
LUEFT_PASSIVKUEHLUNG_UEBER_FORTLUEFTER
32.768
LUEFTERDREHZAHL
0
LZ_VERD_1_2_HEIZBETRIEB
0
LZ_VERD_1_2_KUEHLBETRIEB
0
LZ_VERD_1_2_WW_BETRIEB
0
LZ_VERD_1_HEIZBETRIEB
83
LZ_VERD_1_KUEHLBETRIEB
0
LZ_VERD_1_WW_BETRIEB
3.765
LZ_VERD_2_HEIZBETRIEB
0
LZ_VERD_2_KUEHLBETRIEB
0
LZ_VERD_2_WW_BETRIEB
0
MISCHERLAUFZEIT
0
OELSUMPFTEMP
33,3 °C
PARAMETERSATZ
7
QUELLENMEDIUM
0
QUELLENPUMPEN_STATUS
32.768
RUECKLAUFTEMP
21,5 °C
SCHALTFKT_IWS
0
SOFTWARE_NUMMER
147
SOLAR_KOLLEKTOR_3_I_ANTEIL
0
SOLLWERT_UEBERHITZUNG
64
SONDERKREIS_STATUS
0
SPANNUNG_INVERTER
224,0 V
SPEICHER_STATUS
33.024
SPEICHERBEDARF
32.768
STROM_INVERTER
0,0 A
STUETZSTELLE_HD1
100
STUETZSTELLE_HD2
4.300
STUETZSTELLE_ND1
100
STUETZSTELLE_ND2
1.700
TEILVORRANG_WW
32.768
TEMPORALE_LUEFTUNGSSTUFE_DAUER
32.768
TESTOBJECT1
0
TESTOBJECT2
1.358
TESTOBJECT3
299
TESTOBJECT4
0
TESTOBJECT5
0
TESTOBJECT6
23.815
TESTOBJECT7
79
TESTOBJECT8
32.768
TESTOBJECT9
8.145
TESTOBJECT10
32.768
TESTOBJECT11
32.768
TESTOBJECT12
32.768
TESTOBJECT13
32.768
TESTOBJECT14
32.768
TESTOBJECT15
30
TESTOBJECT16
70
TESTOBJECT17
7
TESTOBJECT18
3
TESTOBJECT19
32.768
TESTOBJECT20
32.768
TESTOBJECT21
32.768
TESTOBJECT22
64
TESTOBJECT23
32.768
TESTOBJECT24
13.428
TESTOBJECT25
51
TESTOBJECT26
32.768
TESTOBJECT27
32.768
TESTOBJECT28
32.768
TESTOBJECT29
0
TESTOBJECT30
0
TESTOBJECT31
34
TESTOBJECT32
32.768
TESTOBJECT33
32.768
V_OEFFNUNGSGRAD_ZWISCHENEINSPRITZUNG
70
VERDAMPFERTEMP_VOR_KOMPENSATION
231
VERDICHTER
Unbekannt
VERFLUESSIGER_TEMP
17,0 °C
VORLAUFTEMP
26,0 °C
ZWISCHENEINSPRITZUNG_ISTTEMP
32.768

[kr0ner]

do you still have the ISG connected?