The launch command launches a browser for Web UI or TensorBoard. The following main topics are discussed in this section:
The webui subcommand launches the Nauta web user interface with credentials.
Note: If you are using CLI through remote access, you will need to setup an X server for tunneling over SSH with port forwarding or use SSH Proxy command tunneling. After establishing a tunnel from the gateway to your local machine, you can use the URL provided by this command.
nctl launch webui [options]
None.
| Name | Required | Description |
|---|---|---|
--no-launch |
No | Run this command without a web browser starting; only proxy tunnel is created. |
-p, --port INTEGER RANGE |
No | If given, the application will be exposed on a local machine under [port] port. |
-f, --force |
No | Ignore (most) confirmation prompts during command execution |
-v, --verbose |
No | Set verbosity level: -v for INFO, -vv for DEBUG |
-h, --help |
No | Displays help messaging information. |
Link to an exposed application.
nctl launch webui
This command returns a Go-to URL. The following is an example only:
Launching...Go to http://localhost:14000?token=eyJhbGciOiJSUzI1NiIsImtpZCI6IiJ9.eyJpc3MiOiJrd
WJlcm5ldVzL3NlcnZpY2VhY2NvdW50Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9uY
W1lc3BhY2UiOiJiZXRoYW55Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9zZWNyZXQu
NlcnZpY2Ut…
Proxy connection created.
Press Ctrl-C key to close a port forwarding process...
The tensorboard subcommand launches the TensorBoard web user interface front end with credentials, with the indicated experiment loaded.
Note: If you are using CLI through remote access, you will need to setup an X server for tunneling over SSH with port forwarding or use SSH Proxy command tunneling. After establishing a tunnel from the gateway to your local machine, you can use the URL provided by this command.
Format of the command is as follows:
nctl launch tensorboard [options] EXPERIMENT-NAME
| Name | Required | Description |
|---|---|---|
EXPERIMENT-NAME |
Yes | Experiment name |
A user can pass one or more names of experiments separated with spaces. If an experiment that should
be displayed in TensorBoard belongs to a current user, the user has to give only its name. If this experiment
is owned by another user, the name of an experiment should be preceded with a name of this second user
in the following format: username/experiment-name
| Name | Required | Description |
|---|---|---|
--no-launch |
No | To create tunnel without launching web browser. |
-tscp --tensorboard-service-client-port INTEGER RANGE |
No | Local port on which TensorBoard service client will be started. |
-p, --port INTEGER RANGE |
No | Port on which service will be exposed locally. |
-f, --force |
No | Ignore (most) confirmation prompts during command execution |
-v, --verbose |
No | Set verbosity level: -v for INFO, -vv for DEBUG |
-h, --help |
No | Displays help messaging information. |
Link to an exposed application.
nctl launch tensorboard experiment75
An example might appear as:
http://127.0.0.1/tensorboard/token=AB123CA27F