[USB150] lighttpd is linked against libcrypto.so.1.0.0, image only has libcrypto.so.1.1

[mdeneen]

This prevents lighttpd from starting. As such, there is no admin interface.

Does something in the packages repository need to be linked again?

[mdeneen]

I extracted the squashfs root from openwrt-usb150-3.027.bin and it contains libcrypto.so.1.0.0, so there definitely appears to be a version mismatch between what imagebuilder produces and what gl-inet provides for a stock firmware image.

[ougang]

Thank you for your feedback, this is a dependency caused by the update of the openssl library. We have resolved this issue, and we will update the relevant software packages later.

[mdeneen]

Thanks, ougang!

[mdeneen]

ougang,

wget is also linked to an old libcrypto.

root@OpenWrt:/usr/bin# ldd wget
/lib/ld-musl-mipsel-sf.so.1 (0x77ed9000)
libpcre.so.1 => /usr/lib/libpcre.so.1 (0x77e94000)
Error loading shared library libssl.so.1.0.0: No such file or directory (needed by wget)
Error loading shared library libcrypto.so.1.0.0: No such file or directory (needed by wget)
libz.so.1 => /usr/lib/libz.so.1 (0x77e74000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x77e50000)
libc.so => /lib/ld-musl-mipsel-sf.so.1 (0x77ed9000)

[mdeneen]

dig, libbind9, libdns, libisc, libisccc, and libisccfg also link to libcrypto.so.1.0.0.

You can force a downgrade to this file:
https://archive.openwrt.org/releases/packages-18.06/mips_24kc/base/libopenssl_1.0.2u-1_mips_24kc.ipk

By including it in the flashed files you can have a service that on the first boot it will force the downgrade.

[mdeneen]

I was able to build the packages using the SDK and add them to the image builder.

When flashed was the desired files present?

Or did it upgrade to libopenssl_1.1.0

You can find out with:
opkg info libopenssl

and this will list its files
opkg list libopenssl

[mdeneen]

Package: libopenssl
Version: 1.1.1d-2
Depends: libc
Status: install ok installed
Architecture: mipsel_24kc
Installed-Time: 1612454706

To be clear -- I rebuilt wget, bind, etc and not openssl.

Looks like imagebuilder is installing the latest version by default. I am not sure if you can add an older version and have that install by default.

[Hoff-GLiNet]

Hi @mdeneen Have you solved your problem?We have released version 3.105, which you can test with the latest version 3.105.