Skip to content

MACHINE_GCODE.md

Latest commit

 

History

History
313 lines (292 loc) · 9.7 KB

MACHINE_GCODE.md

File metadata and controls

313 lines (292 loc) · 9.7 KB

Machine G-code for Bambu Studio and Orca slicer

Bambu Studio: Machine start G-code

START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOOL={initial_no_support_extruder}
T{initial_no_support_extruder}
SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]

Orca slicer: Machine start G-code

START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOOL={initial_no_support_extruder}
SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]

Machine end G-code

END_PRINT

Layer change G-code

;AFTER_LAYER_CHANGE
;[layer_z]
SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}
; layer num/total_layer_count: {layer_num+1}/[total_layer_count]

Bambu Studio: Change filament G-code

; Machine: AD5X
; Bambufy: v1.2.3
{if old_filament_temp < new_filament_temp}
M104 S[new_filament_temp]
{endif}
G1 Z{max_layer_z + 3.0} F1200
M204 S9000
T[next_extruder]
{if next_extruder < 255}
{if flush_length > 0}
_GOTO_TRASH
{endif}
{if flush_length_1 > 1}
; FLUSH_START
{if flush_length_1 > 23.7}
G1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part
G1 E{(flush_length_1 - 23.7) * 0.04} F{old_filament_e_feedrate/2}
G1 E{(flush_length_1 - 23.7) * 0.21} F{old_filament_e_feedrate}
G1 E{(flush_length_1 - 23.7) * 0.04} F{old_filament_e_feedrate/2}
G1 E{(flush_length_1 - 23.7) * 0.21} F{new_filament_e_feedrate}
G1 E{(flush_length_1 - 23.7) * 0.04} F{new_filament_e_feedrate/2}
G1 E{(flush_length_1 - 23.7) * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{(flush_length_1 - 23.7) * 0.04} F{new_filament_e_feedrate/2}
G1 E{(flush_length_1 - 23.7) * 0.21} F{new_filament_e_feedrate}
{else}
G1 E{flush_length_1} F{old_filament_e_feedrate}
{endif}
; FLUSH_END
{endif}
{if flush_length_1 > 45 && flush_length_2 > 1}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
G1 E[new_retract_length_toolchange] F1800
{endif}
M104 S[new_filament_temp]
{if flush_length_2 > 1}
; FLUSH_START
G1 E{flush_length_2 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_2 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_2 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_2 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_2 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_2 * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{flush_length_2 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_2 * 0.21} F{new_filament_e_feedrate}
; FLUSH_END
{endif}
{if flush_length_2 > 45 && flush_length_3 > 1}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
G1 E[new_retract_length_toolchange] F1800
{endif}
{if flush_length_3 > 1}
; FLUSH_START
G1 E{flush_length_3 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_3 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_3 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_3 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_3 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_3 * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{flush_length_3 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_3 * 0.21} F{new_filament_e_feedrate}
; FLUSH_END
{endif}
{if flush_length_3 > 45 && flush_length_4 > 1}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
G1 E[new_retract_length_toolchange] F1800
{endif}
{if flush_length_4 > 1}
; FLUSH_START
G1 E{flush_length_4 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_4 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_4 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_4 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_4 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_4 * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{flush_length_4 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_4 * 0.21} F{new_filament_e_feedrate}
; FLUSH_END
{endif}
{if flush_length > 0}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
{endif}
G1 Y220 ;Exit trash
{endif}
M104 S[new_filament_temp]
{if layer_z <= (initial_layer_print_height + 0.001)}
M204 S[initial_layer_acceleration]
{else}
M204 S[default_acceleration]
{endif}

Orca slicer

If you have created your profile without using the 3MF I provided, then take these settings into account in addition to these Machines gcode:

  • Printer settings
    • Multimaterial
      • Filament load time: 23
      • Filament unload time: 23
    • Extruder
      • Retraction when switching material length: 2
      • Extra length on restart: 0
  • Material setting
    • Multimaterial
      • Minimal purge on prime tower: 15

Orca slicer: Change filament G-code, unified: poop and nopoop

With this unified gcode for filament change, you only need to enable or disable this option to purge in the tower(nopoop) or in the form of poops

image 
; Machine: AD5X
; Bambufy: v1.2.3
{if old_filament_temp < new_filament_temp}
M104 S[new_filament_temp]
{endif}

M204 S9000

{if purge_in_prime_tower || flush_length == 0}
{if toolchange_count > 1}
_NOPOOP
{endif}
G1 Z{max_layer_z + 3.0} F1200
T[next_extruder]
{else}
G1 Z{max_layer_z + 3.0} F1200
T[next_extruder]
{if next_extruder < 255}
{if flush_length > 1}
_GOTO_TRASH
{endif}
{if flush_length_1 > 1}
; FLUSH_START
{if flush_length_1 > 23.7}
G1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part
G1 E{(flush_length_1 - 23.7) * 0.04} F{old_filament_e_feedrate/2}
G1 E{(flush_length_1 - 23.7) * 0.21} F{old_filament_e_feedrate}
G1 E{(flush_length_1 - 23.7) * 0.04} F{old_filament_e_feedrate/2}
G1 E{(flush_length_1 - 23.7) * 0.21} F{new_filament_e_feedrate}
G1 E{(flush_length_1 - 23.7) * 0.04} F{new_filament_e_feedrate/2}
G1 E{(flush_length_1 - 23.7) * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{(flush_length_1 - 23.7) * 0.04} F{new_filament_e_feedrate/2}
G1 E{(flush_length_1 - 23.7) * 0.21} F{new_filament_e_feedrate}
{else}
G1 E{flush_length_1} F{old_filament_e_feedrate}
{endif}
; FLUSH_END
{if flush_length_1 > 45 && flush_length_2 > 1}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
G1 E[new_retract_length_toolchange] F1800
{endif}
{endif}
{if flush_length > 1 && flush_length_1 == 0}
; FLUSH_START
{if flush_length > 23.7}
G1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part
G1 E{(flush_length - 23.7) * 0.04} F{old_filament_e_feedrate/2}
G1 E{(flush_length - 23.7) * 0.21} F{old_filament_e_feedrate}
G1 E{(flush_length - 23.7) * 0.04} F{old_filament_e_feedrate/2}
G1 E{(flush_length - 23.7) * 0.21} F{new_filament_e_feedrate}
G1 E{(flush_length - 23.7) * 0.04} F{new_filament_e_feedrate/2}
G1 E{(flush_length - 23.7) * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{(flush_length - 23.7) * 0.04} F{new_filament_e_feedrate/2}
G1 E{(flush_length - 23.7) * 0.21} F{new_filament_e_feedrate}
{else}
G1 E{flush_length} F{old_filament_e_feedrate}
{endif}
; FLUSH_END
{if flush_length > 45 && flush_length_2 > 1}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
G1 E[new_retract_length_toolchange] F1800
{endif}
{endif}

M104 S[new_filament_temp]

{if flush_length_2 > 1}
; FLUSH_START
G1 E{flush_length_2 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_2 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_2 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_2 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_2 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_2 * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{flush_length_2 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_2 * 0.21} F{new_filament_e_feedrate}
; FLUSH_END
{endif}
{if flush_length_2 > 45 && flush_length_3 > 1}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
G1 E[new_retract_length_toolchange] F1800
{endif}
{if flush_length_3 > 1}
; FLUSH_START
G1 E{flush_length_3 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_3 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_3 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_3 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_3 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_3 * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{flush_length_3 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_3 * 0.21} F{new_filament_e_feedrate}
; FLUSH_END
{endif}
{if flush_length_3 > 45 && flush_length_4 > 1}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
G1 E[new_retract_length_toolchange] F1800
{endif}
{if flush_length_4 > 1}
; FLUSH_START
G1 E{flush_length_4 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_4 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_4 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_4 * 0.21} F{new_filament_e_feedrate}
G1 E{flush_length_4 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_4 * 0.21} F{new_filament_e_feedrate}
M106 P1 S{255/100.0*fan_max_speed[next_extruder]*0.4}
G1 E{flush_length_4 * 0.04} F{new_filament_e_feedrate/2}
G1 E{flush_length_4 * 0.21} F{new_filament_e_feedrate}
; FLUSH_END
{endif}
{if flush_length > 0}
; WIPE
M106 P1 S0
G1 E-[new_retract_length_toolchange] F1800
_SBROS_TRASH
{endif}
{if toolchange_count > 1}
G1 Y220 ;Exit trash
{endif}
{endif}
{endif}

M104 S[new_filament_temp]

{if layer_z <= (initial_layer_print_height + 0.001)}
M204 S[initial_layer_acceleration]
{else}
M204 S[default_acceleration]
{endif}

Pause G-code

PAUSE