Openwrt Help

[riodda]

Hi, sorry to disrtub but i need some advice and sorry for the misuse of the issue.

I'm using openwrt and struggling with the slcan driver, unfortnuatley on openwrt there is no gs_usb support yet to switch to candlelight, my only option is ems_usb.
I builded and flashed and I see the device with ls_usb

root@OpenWrt:/# lsusb Bus 002 Device 004: ID 12d6:0444 EMS Dr. Thomas Wuensche CPC-USB/ARM7
But not sure if the kernel module is loaded properly

can_dev 8035 6 c_can,usb_8dev,peak_usb,kvaser_usb,esd_usb2,ems_usb ems_usb 6400 0

I've tryed to load the interface
root@OpenWrt:/# ip link set can0 type can bitrate 250000 ip: either "dev" is duplicate, or "type" is garbage

Any help wellcome !
Thanks.

[riodda]

I made it working, just need to install ip-full package, ip command fro busybox lacks some functions.

opkg install ip-full

ip link set can0 type can bitrate 1000000
[ 182.444194] ems_usb 2-1.4:1.0 can0: setting BTR0=0x00 BTR1=0x14
ifconfig can0 up

[salberto2000]

I made it working, just need to install ip-full package, ip command fro busybox lacks some functions.

opkg install ip-full

ip link set can0 type can bitrate 1000000 [ 182.444194] ems_usb 2-1.4:1.0 can0: setting BTR0=0x00 BTR1=0x14 ifconfig can0 up

Hi I am trying to use can-utils with an Onion Omega 2 Pro. It has OpenWRT but none of the commands work. Any suggestions?