usb asp as usb linker

[villamany]

Hello, could be an usb asp flashed as an arduino usb linker?

[c---]

It might work depending on which MCU it is using. If it's using an atmega8 type (168, 328, etc) or atmega32u4 then it likely will work or could be made to work with minor changes.

[villamany]

Thanks, but I need some more knowledge about Amtel. I have one of my USBASP Flashed with your code (by jumping jp2 and using another USBASP to flash it) but when connected to PC i get an "unknown device" error.

[c---]

If using the stock USB Linker code the USBASP needs to be connected via RS-232 serial. For this to work the USBASP would need its serial port pins exposed.

Otherwise the USBASP's USB code would have to be merged with the USB Linker code to make it work over USB. Currently this does not exist.

What type of atmel MCU is your USBASP using?

[villamany]

Is a cheap one with an atmega8

Enviado de Samsung Mobile

-------- Mensaje original --------
De: Chris Osgood notifications@github.com
Fecha:
Para: c---/ArduinoUSBLinker ArduinoUSBLinker@noreply.github.com
Cc: villamany villamany@msn.com
Asunto: Re: [ArduinoUSBLinker] usb asp as usb linker (#1)

If using the stock USB Linker code the USBASP needs to be connected via RS-232 serial. For this to work the USBASP would need its serial port pins exposed.

Otherwise the USBASP's USB code would have to be merged with the USB Linker code to make it work over USB. Currently this does not exist.

What type of atmel MCU is your USBASP using?

—
Reply to this email directly or view it on GitHub.