diff --git a/README.md b/README.md
index 8c2379b..fdabc0c 100644
--- a/README.md
+++ b/README.md
@@ -146,6 +146,29 @@ reappear after serial ambiguity is resolved.
 The identity identifies the controller's header, not the physical fan attached
 to it; replacing the fan does not change the saved assignment.
 
+## MSI boards with the nct6687 driver
+
+On some MSI boards the nct6687 driver accepts speed changes for the system
+fans (`pwm3` and up) but does not apply them, so those fans stay at about 60%.
+The driver documents this and fixes it with its `msi_fan_brute_force` module
+option. When a configured fan uses one of those channels and the option is not
+detected, the settings page shows a notice with the workaround. The option's
+loaded state is read from the driver's `fan_control_watchdog` attribute or its
+"MSI fan brute force mode" kernel log line, falling back to the modprobe
+configuration. While a fan on one of those channels is set above 60% but reads
+back 60% or less for 10 seconds, the plugin also sends one Unraid
+notification per fan per boot. On Unraid, set the option on the flash drive and
+reboot:
+
+```bash
+mkdir -p /boot/config/modprobe.d
+echo "options nct6687 msi_fan_brute_force=1" >> /boot/config/modprobe.d/nct6687.conf
+```
+
+The option was added to the driver in December 2025; `modinfo nct6687` lists
+it when the installed build supports it. See the
+[driver documentation](https://github.com/Fred78290/nct6687d#loading-msi_fan_brute_force-parameter-fails).
+
 Support / Issues
 - https://github.com/andrebrait/fanctrlplus/issues
 
diff --git a/src/usr/local/emhttp/plugins/fanctrlplus2/css/fcp.base.css b/src/usr/local/emhttp/plugins/fanctrlplus2/css/fcp.base.css
index ef97674..29162bd 100644
--- a/src/usr/local/emhttp/plugins/fanctrlplus2/css/fcp.base.css
+++ b/src/usr/local/emhttp/plugins/fanctrlplus2/css/fcp.base.css
@@ -296,6 +296,8 @@
   margin: 0;
   white-space: nowrap;
 }
+.fcp-nct6687-notice { justify-content: flex-start; }
+.fcp-nct6687-notice code.fcp-cmd { display: block; margin: 4px 0; user-select: all; }
 
 /* ===== Sort toggle ===== */
 .fanctrl-sort-toggle {
diff --git a/src/usr/local/emhttp/plugins/fanctrlplus2/fanctrlplus2.page b/src/usr/local/emhttp/plugins/fanctrlplus2/fanctrlplus2.page
index 4b4a76c..f3e8d88 100644
--- a/src/usr/local/emhttp/plugins/fanctrlplus2/fanctrlplus2.page
+++ b/src/usr/local/emhttp/plugins/fanctrlplus2/fanctrlplus2.page
@@ -156,6 +156,7 @@ flock($page_config_lock, LOCK_UN);
 fclose($page_config_lock);
 $cpu_sensors = detect_cpu_sensors();
 $aux_sensors = detect_aux_sensors();
+$fcp_nct6687_notice = fcp_nct6687_brute_force_missing(array_column($all_cfg, 'controller'));
 ?>
 
 <div class="fanctrl-header">
@@ -173,6 +174,18 @@ $aux_sensors = detect_aux_sensors();
   <span>FanCtrl Plus 2 files changed on the server. Reload to use matching interface resources.</span>
   <button type="button" id="fcp-asset-reload">Reload page</button>
 </div>
+<?php if ($fcp_nct6687_notice): ?>
+<div class="fcp-asset-update-notice fcp-nct6687-notice">
+  <span>
+    <strong>MSI board detected:</strong> the nct6687 driver may ignore speed changes on system fans, which then stay at about 60%.
+    The driver's documented workaround is its <code>msi_fan_brute_force</code> option. Run the commands below from an Unraid terminal, then reboot:
+    <code class="fcp-cmd">mkdir -p /boot/config/modprobe.d</code>
+    <code class="fcp-cmd">echo "options nct6687 msi_fan_brute_force=1" &gt;&gt; /boot/config/modprobe.d/nct6687.conf</code>
+    If <code>modinfo nct6687 | grep msi_fan_brute_force</code> prints nothing, the installed driver predates the option and needs an update.
+    <a href="https://github.com/Fred78290/nct6687d#loading-msi_fan_brute_force-parameter-fails" target="_blank" rel="noopener">Driver documentation</a>
+  </span>
+</div>
+<?php endif; ?>
 
 <script>
 const DEBUG = false; // Enables diagnostic console output.
diff --git a/src/usr/local/emhttp/plugins/fanctrlplus2/include/Common.php b/src/usr/local/emhttp/plugins/fanctrlplus2/include/Common.php
index 0392c57..188201b 100644
--- a/src/usr/local/emhttp/plugins/fanctrlplus2/include/Common.php
+++ b/src/usr/local/emhttp/plugins/fanctrlplus2/include/Common.php
@@ -354,6 +354,63 @@ function list_pwm(string $hwmon_glob = '/sys/class/hwmon/hwmon*') {
   return $out;
 }
 
+// On MSI boards the nct6687 driver uses its msi_alt1 register layout, where
+// writes to the system-fan channels (pwm3 and up) are accepted but ignored
+// unless the msi_fan_brute_force module option is set; those fans then stay
+// at about 60%. The option is not readable from sysfs, so its state is taken,
+// in order, from the fan_control_watchdog attribute (created only in that
+// mode, by newer builds), the driver's "MSI fan brute force mode" line in the
+// kernel log (printed on auto-detected MSI boards; the latest load wins), and
+// finally the modprobe configuration.
+// https://github.com/Fred78290/nct6687d#loading-msi_fan_brute_force-parameter-fails
+function fcp_nct6687_brute_force_missing(
+  array $controllers,
+  string $module_dir = '/sys/module/nct6687',
+  string $modprobe_glob = '/etc/modprobe.d/*.conf',
+  ?string $kernel_log = null
+): bool {
+  $fan_config = @file_get_contents("$module_dir/parameters/fan_config");
+  if ($fan_config === false || trim($fan_config) !== 'msi_alt1') return false;
+
+  $hwmon = null;
+  foreach ($controllers as $controller) {
+    if (!preg_match('/^pwm(\d+)$/', basename((string)$controller), $m) || (int)$m[1] < 3) continue;
+    $dir = dirname($controller);
+    // The driver names its hwmon device after the chip it found.
+    if (preg_match('/^nct668[367]$/', trim((string)@file_get_contents("$dir/name")))) {
+      $hwmon = $dir;
+      break;
+    }
+  }
+  if ($hwmon === null || file_exists("$hwmon/fan_control_watchdog")) return false;
+
+  // syslog first, dmesg last: dmesg holds the most recent load, but its ring
+  // buffer may have dropped the line on a long uptime. Only the last 4 MiB of
+  // syslog are read, so a huge log cannot exhaust PHP's memory limit.
+  $syslog = '/var/log/syslog';
+  $kernel_log ??= (string)@file_get_contents($syslog, false, null, -min(4 << 20, (int)@filesize($syslog)))
+    . "\n" . (string)@shell_exec('dmesg 2>/dev/null');
+  if (preg_match_all('/nct668\d[^\n]*MSI fan brute force mode: (enabled|disabled)/', $kernel_log, $m)) {
+    return end($m[1]) === 'disabled';
+  }
+
+  // modprobe reads the files in name order and passes every option along, and
+  // the kernel applies them in turn, so the last setting wins. Kernel bools
+  // accept 1/y/t/on (optionally quoted), or the bare name; '-' and '_' are
+  // interchangeable.
+  $files = glob($modprobe_glob) ?: [];
+  usort($files, fn($a, $b) => strcmp(basename($a), basename($b)));
+  $last = null;
+  foreach ($files as $conf) {
+    preg_match_all('/^\s*options\s+nct6687\s+(.*)$/m', (string)@file_get_contents($conf), $lines);
+    foreach ($lines[1] as $args) {
+      preg_match_all('/(?:^|\s)msi[-_]fan[-_]brute[-_]force(?:="?([^\s"]*)"?)?(?=\s|$)/', $args, $vals);
+      foreach ($vals[1] as $val) $last = $val;
+    }
+  }
+  return $last === null || !preg_match('/^(?:$|[1yYtT]|[oO][nN])/', $last);
+}
+
 // Find storcli binary (storcli64, storcli2, storcli) in common paths
 function find_storcli(): ?string {
   $candidates = [
diff --git a/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/disk_group_control.sh b/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/disk_group_control.sh
index a647e8e..3a17e7b 100644
--- a/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/disk_group_control.sh
+++ b/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/disk_group_control.sh
@@ -253,3 +253,50 @@ interval_seconds() {
   (( secs > fcp_interval_max_seconds )) && secs=$fcp_interval_max_seconds
   printf '%s' "$secs"
 }
+
+# ===== MSI nct6687 stuck-fan check (#13) =====
+# On MSI boards in the driver's msi_alt1 layout, system-fan channels (pwm3 and
+# up) ignore speed changes unless the msi_fan_brute_force option is set, and
+# stay at about 60%. Reading pwmN back returns the chip's actual output, so a
+# fan driven above 60% that keeps reading back lower is caught here. Drivers
+# that expose fan_control_watchdog run with the option set and are skipped.
+fcp_notify_bin="${fcp_notify_bin:-/usr/local/emhttp/webGui/scripts/notify}"
+fcp_nct6687_module="${fcp_nct6687_module:-/sys/module/nct6687}"
+
+fcp_nct6687_msi_channel() {
+  local controller="$1" chip
+  [[ "$controller" =~ /pwm([0-9]+)$ ]] && (( BASH_REMATCH[1] >= 3 )) || return 1
+  chip=$(cat "$(dirname "$controller")/name" 2>/dev/null)
+  [[ "$chip" =~ ^nct668[367]$ ]] || return 1
+  [[ ! -e "$(dirname "$controller")/fan_control_watchdog" ]] || return 1
+  [[ "$(cat "$fcp_nct6687_module/parameters/fan_config" 2>/dev/null)" == "msi_alt1" ]]
+}
+
+# A PWM value as a whole percentage, rounded the way the dashboard shows it.
+fcp_pwm_percent() {
+  echo $(( ($1 * 100 + 127) / 255 ))
+}
+
+# Echoes when the current stuck stretch began (the given time, or the start
+# carried over), or nothing when the fan is not stuck. Stuck means set above
+# 60% but reading back 60% or less: the speed a fan ignoring its writes holds.
+# The caller warns once a stretch has lasted 10 seconds, which a chip still
+# ramping up would not.
+fcp_stuck_since() {
+  local since="$1" now="$2" target="$3" actual="$4"
+  if [[ "$actual" =~ ^[0-9]+$ ]] &&
+     (( $(fcp_pwm_percent "$target") > 60 && $(fcp_pwm_percent "$actual") <= 60 )); then
+    echo "${since:-$now}"
+  fi
+}
+
+# One Unraid notification per fan per boot; the flag lives on tmpfs. Without
+# a flag every tick would notify again, so no flag means no notification.
+fcp_notify_stuck() {
+  local name="$1" target="$2" actual="$3" flag="$4"
+  [[ -e "$flag" ]] && return 0
+  touch "$flag" 2>/dev/null || return 0
+  "$fcp_notify_bin" -e "FanCtrl Plus 2" -i warning -l "/Settings/fanctrlplus2" \
+    -s "Fan $name is not reaching its set speed" \
+    -d "Set to $(fcp_pwm_percent "$target")% but the nct6687 controller reports $(fcp_pwm_percent "$actual")%. On MSI boards this driver ignores system-fan speed changes unless its msi_fan_brute_force option is set. See the FanCtrl Plus 2 settings page."
+}
diff --git a/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/fanctrlplus2_loop.sh b/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/fanctrlplus2_loop.sh
index 2d6836c..40d3400 100644
--- a/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/fanctrlplus2_loop.sh
+++ b/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/fanctrlplus2_loop.sh
@@ -33,6 +33,8 @@ aux_locate_bins "${aux_sensor:-}"
 source "/usr/local/emhttp/plugins/fanctrlplus2/scripts/disk_group_control.sh"
 
 plugin="fanctrlplus2"
+# The dashboard updater also creates this, but may start after the loops.
+mkdir -p "/var/tmp/${plugin}"
 custom="${custom:-$(basename "$cfg_file" .cfg)}"
 controller_enable="${controller}_enable"
 
@@ -44,6 +46,10 @@ else
   fan_path=""
 fi
 
+stuck_since=""
+nct6687_watch=0
+fcp_nct6687_msi_channel "$controller" && nct6687_watch=1
+
 prev_pwm=-1
 hist_file="/var/tmp/${plugin}/history_${plugin}_${custom}"
 
@@ -184,5 +190,16 @@ while true; do
     fi
   fi
 
+  # Fans the nct6687 MSI layout may ignore: warn once one has stayed at 60% or
+  # less for 10 seconds while set above it. The target is the last value
+  # written, which a change under 5 leaves in place.
+  if (( nct6687_watch )); then
+    actual_pwm=$(cat "$controller" 2>/dev/null)
+    stuck_since=$(fcp_stuck_since "$stuck_since" "$SECONDS" "$prev_pwm" "$actual_pwm")
+    if [[ -n "$stuck_since" ]] && (( SECONDS - stuck_since >= 10 )); then
+      fcp_notify_stuck "$custom" "$prev_pwm" "$actual_pwm" "/var/tmp/${plugin}/nct6687_stuck_${custom}"
+    fi
+  fi
+
   sleep "$(interval_seconds)"
 done
diff --git a/tests/nct6687_notice_test.php b/tests/nct6687_notice_test.php
new file mode 100644
index 0000000..0125cb1
--- /dev/null
+++ b/tests/nct6687_notice_test.php
@@ -0,0 +1,101 @@
+<?php
+
+require_once __DIR__ . '/../src/usr/local/emhttp/plugins/fanctrlplus2/include/Common.php';
+
+$failures = [];
+$root = sys_get_temp_dir() . '/fcp_nct6687_notice_' . getmypid();
+$module = "$root/module";
+$hwmon = "$root/devices/platform/nct6687.2592/hwmon/hwmon7";
+$other = "$root/devices/platform/it87.552/hwmon/hwmon3";
+$modprobe = "$root/modprobe.d";
+
+@mkdir("$module/parameters", 0777, true);
+@mkdir($hwmon, 0777, true);
+@mkdir($other, 0777, true);
+@mkdir($modprobe, 0777, true);
+file_put_contents("$hwmon/name", "nct6687\n");
+file_put_contents("$other/name", "it8728\n");
+file_put_contents("$modprobe/nct6683.conf", "blacklist nct6683\ninstall nct6683 /bin/false\n");
+
+$log = '';
+$check = function (string $label, bool $expected, array $controllers) use (&$failures, &$log, $module, $modprobe): void {
+    $actual = fcp_nct6687_brute_force_missing($controllers, $module, "$modprobe/*.conf", $log);
+    if ($actual !== $expected) {
+        $failures[] = "$label: expected " . var_export($expected, true) . ', got ' . var_export($actual, true);
+    }
+};
+
+$sys_fan = ["$other/pwm3", "$hwmon/pwm5"];
+
+$check('driver not loaded', false, $sys_fan);
+
+file_put_contents("$module/parameters/fan_config", "default\n");
+$check('default register layout', false, $sys_fan);
+
+file_put_contents("$module/parameters/fan_config", "msi_alt1\n");
+$check('msi_alt1 without the option', true, $sys_fan);
+$check('first system channel', true, ["$hwmon/pwm3"]);
+$nct6686 = "$root/devices/platform/nct6687.2593/hwmon/hwmon8";
+@mkdir($nct6686, 0777, true);
+file_put_contents("$nct6686/name", "nct6686\n");
+$check('nct6686 chip', true, ["$other/pwm3", "$nct6686/pwm3"]);
+$check('only CPU and pump channels', false, ["$hwmon/pwm1", "$hwmon/pwm2", "$hwmon/pwm1_enable", "$hwmon/pwm3_enable"]);
+$check('system channel on another chip', false, ["$other/pwm5"]);
+$check('no fans configured', false, []);
+
+foreach ([
+    'options nct6687 msi_fan_brute_force=0' => true,
+    'options nct6687 msi_fan_brute_force=n' => true,
+    '# options nct6687 msi_fan_brute_force=1' => true,
+    'options nct6683 msi_fan_brute_force=1' => true,
+    'options nct6687x msi_fan_brute_force=1' => true,
+    'options nct6687 not_msi_fan_brute_force=1' => true,
+    'options nct6687 msi_fan_brute_force=1' => false,
+    "# Set by hand\noptions nct6687 msi_fan_brute_force=1" => false,
+    "options nct6687 fan_config=msi_alt1 msi-fan-brute-force=Y\n" => false,
+    'options  nct6687 msi_fan_brute_force' => false,
+    'options nct6687 msi_fan_brute_force=on' => false,
+    'options nct6687 msi_fan_brute_force="true"' => false,
+    "options nct6687 msi_fan_brute_force=1\noptions nct6687 msi_fan_brute_force=0" => true,
+    'options nct6687 msi_fan_brute_force=0 msi_fan_brute_force=1' => false,
+] as $line => $expected) {
+    file_put_contents("$modprobe/nct6687.conf", "$line\n");
+    $check("modprobe line '$line'", $expected, $sys_fan);
+}
+
+// Across files, modprobe reads them in name order, so the later file wins.
+file_put_contents("$modprobe/zz-off.conf", "options nct6687 msi_fan_brute_force=0\n");
+$check('a later file disables the option', true, $sys_fan);
+rename("$modprobe/zz-off.conf", "$modprobe/00-off.conf");
+$check('an earlier file is overridden', false, $sys_fan);
+unlink("$modprobe/00-off.conf");
+file_put_contents("$modprobe/nct6687.conf", "options nct6687 msi_fan_brute_force=1\n");
+
+// The kernel log reports the loaded value, so it overrides the modprobe files
+// (which the loop above left setting the option).
+$enabled = "Oct  6 06:20:01 Tower kernel: nct6687 nct6687.2592: MSI fan brute force mode: enabled\n";
+$disabled = "[    7.912345] nct6687 nct6687.2592: MSI fan brute force mode: disabled\n";
+$log = $disabled;
+$check('kernel log: disabled, modprobe option set after boot', true, $sys_fan);
+$log = "$disabled$enabled";
+$check('kernel log: latest load enabled', false, $sys_fan);
+$log = "$enabled$disabled";
+$check('kernel log: latest load disabled', true, $sys_fan);
+file_put_contents("$modprobe/nct6687.conf", "options nct6687 msi_fan_brute_force=0\n");
+$log = $enabled;
+$check('kernel log: enabled, option passed outside modprobe.d', false, $sys_fan);
+$log = '';
+unlink("$modprobe/nct6687.conf");
+
+touch("$hwmon/fan_control_watchdog");
+$check('watchdog attribute present', false, $sys_fan);
+$log = $disabled;
+$check('watchdog attribute outranks the kernel log', false, $sys_fan);
+
+exec('rm -rf ' . escapeshellarg($root));
+
+if ($failures) {
+    fwrite(STDERR, implode("\n", $failures) . "\n");
+    exit(1);
+}
+echo "nct6687 notice: OK\n";
diff --git a/tests/nct6687_stuck_test.sh b/tests/nct6687_stuck_test.sh
new file mode 100755
index 0000000..f0e1361
--- /dev/null
+++ b/tests/nct6687_stuck_test.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+
+set -u
+
+root=$(cd "$(dirname "$0")/.." && pwd)
+tmp=$(mktemp -d)
+trap 'rm -rf "$tmp"' EXIT
+
+fcp_nct6687_module="$tmp/module"
+fcp_notify_bin="$tmp/notify"
+source "$root/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/aux_sensors.sh"
+source "$root/src/usr/local/emhttp/plugins/fanctrlplus2/scripts/disk_group_control.sh"
+
+failures=0
+expect_equal() {
+  local expected="$1" actual="$2" message="$3"
+  if [[ "$expected" == "$actual" ]]; then
+    return
+  fi
+  printf '%s\nExpected: %s\nActual: %s\n' "$message" "$expected" "$actual" >&2
+  failures=$((failures + 1))
+}
+
+# ===== fcp_nct6687_msi_channel =====
+nct="$tmp/hwmon7" other="$tmp/hwmon3"
+mkdir -p "$nct" "$other" "$fcp_nct6687_module/parameters"
+echo nct6687 > "$nct/name"
+echo it8728 > "$other/name"
+channel() { fcp_nct6687_msi_channel "$1" && echo yes || echo no; }
+
+expect_equal no "$(channel "$nct/pwm5")" "Without the driver loaded, no channel is watched."
+echo default > "$fcp_nct6687_module/parameters/fan_config"
+expect_equal no "$(channel "$nct/pwm5")" "The default register layout applies speed changes."
+echo msi_alt1 > "$fcp_nct6687_module/parameters/fan_config"
+expect_equal yes "$(channel "$nct/pwm3")" "The first system-fan channel is watched."
+expect_equal no "$(channel "$nct/pwm2")" "The pump channel is not affected."
+expect_equal no "$(channel "$other/pwm5")" "Another chip's channel is not watched."
+echo nct6683 > "$other/name"
+expect_equal yes "$(channel "$other/pwm5")" "The driver's other chip names are watched too."
+touch "$nct/fan_control_watchdog"
+expect_equal no "$(channel "$nct/pwm5")" "A driver running with brute force on is not watched."
+
+# ===== fcp_stuck_since =====
+expect_equal 100 "$(fcp_stuck_since '' 100 255 154)" "Set to 100%, stuck at 60%: a stretch starts now."
+expect_equal 100 "$(fcp_stuck_since 100 110 166 154)" "A new target above 60% keeps the stretch going."
+expect_equal 100 "$(fcp_stuck_since 100 110 155 154)" "61% is above 60%; a reading of 154 rounds to 60%."
+expect_equal '' "$(fcp_stuck_since 100 110 154 120)" "A target of 60% or less ends the stretch."
+expect_equal '' "$(fcp_stuck_since 100 110 255 155)" "A reading above 60% ends the stretch."
+expect_equal '' "$(fcp_stuck_since 100 110 255 '')" "An unreadable value ends the stretch."
+
+# ===== fcp_notify_stuck =====
+printf '#!/bin/bash\nprintf "%%s\\n" "$@" >> "%s/calls"\n' "$tmp" > "$fcp_notify_bin"
+chmod +x "$fcp_notify_bin"
+fcp_notify_stuck HardDriveFans 255 154 "$tmp/flag"
+fcp_notify_stuck HardDriveFans 255 154 "$tmp/flag"
+expect_equal 1 "$(grep -c '^-s$' "$tmp/calls")" "One notification per fan until the flag is cleared at boot."
+expect_equal 1 "$(grep -c '^Set to 100% but the nct6687 controller reports 60%' "$tmp/calls")" \
+  "The notification reports the set and actual speeds as percentages."
+expect_equal 1 "$(grep -cx 'warning' "$tmp/calls")" "The notification is a warning."
+fcp_notify_stuck HardDriveFans 255 154 "$tmp/missing/flag"
+expect_equal 1 "$(grep -c '^-s$' "$tmp/calls")" "Without a flag file, no notification is sent, so ticks cannot repeat it."
+
+if (( failures > 0 )); then
+  exit 1
+fi
+
+echo "nct6687 stuck-fan tests passed"