Skip to content

Milestones

List view

  • Functional MONITORING SCREEN

    **MONITORING SCREEN** is the main screen in the ventilator. It is composed by at least 2 charts (pressure chart and flux chart) while it could be another one (volume chart). In this screen it is showed all params "at real time".

    No due date
    •0/4 issues closed
    0% complete4 open0 closed

  • Functional ALARMS SCREEN

    This screen is to set all the alarm params related to the selected mode in **MODES SCREEN**. It needs: 1. Show configurable params, related to the selected mode and supported by the ventilator. 2. Params with setup with default values. 3. Tabs to switch between **MODES SCREEN** and **PARAMS SCREEN** are enabled.

    No due date
    0% complete0 open0 closed

  • Functional PARAMS SCREEN

    This screen is to set all the params related to the selected mode in **MODES SCREEN**. It needs: 1. Show configurable params, related to the selected mode and supported by the ventilator. 2. Params with setup with default values. 3. Tabs to switch between **MODES SCREEN** and **ALARMS SCREEN** are enabled.

    No due date
    •2/2 issues closed
    100% complete0 open2 closed

  • Functional MODES SCREEN

    The **MODES SCREEN** is to select one Ventilator Mode: * Only enabled modes of the ventilator could be selected and displayed. * In this screen, the tabs of **PARAMS SCREEN**, **ALARMS SCREEN**, **MONITORING SCREEN** don't work. * If one mode is selected, then the GUI change to the **PARAMS SCREEN**.

    No due date
    •2/2 issues closed
    100% complete0 open2 closed

  • Functional layout with Screens and Tabs

    The UI has two main components: 1. Component "ScreenManager" * Contain all the differents screens. 2. Tabs group. * They are commons in all screens because is a shortcut to change between screen. * These tabs are at the bottom of the layout.

    No due date
    •0/1 issues closed
    0% complete1 open0 closed

  • Functional LOAD SCREEN

    To have a functional **LOAD SCREEN** it would have: 1. Display a message of "loading..." 2. Load the configuration (modes and params enabled) * Ask for the configuration if it would be necessary 3. When all is completed, change to **MODE SCREEN**

    No due date
    •1/1 issues closed
    100% complete0 open1 closed