diff --git a/scripts/disable_creality_services.sh b/scripts/disable_creality_services.sh
new file mode 100755
index 0000000..d0f42bc
--- /dev/null
+++ b/scripts/disable_creality_services.sh
@@ -0,0 +1,399 @@
+#!/bin/sh
+
+set -e
+
+# The K1C 2025 starts its stock daemons from /usr/apps/etc/init.d via /etc/init.d/rcK,
+# which iterates over "$(ls -r .../CS??*)". That glob still matches a ".disabled"
+# SUFFIX, so the suffix rename used for the /usr/bin binaries in
+# creality_web_interface.sh would be a silent no-op here - the daemon would simply
+# start again at the next boot. Every rename below therefore uses the "disabled."
+# PREFIX, matching what moonraker_nginx.sh already does for S56moonraker_service and
+# what tools_menu_K1C_2025.sh checks for the Klipper configuration lock.
+#
+# Services this option must never disable, whatever a later edit is tempted to add:
+#   klipper_service - Klipper itself.
+#   nexusp_service  - the touchscreen backend on :7125; the GUI holds an open
+#                     connection to it.
+#   quintusp        - HAL for the LCD backlight, chassis LED, camera arbitration
+#                     and the power-loss GPIO. Disabling it breaks power-loss
+#                     recovery, and it can cancel a running print.
+#   gui_service     - vectorp, the touchscreen itself.
+# Both the S and CS prefixes are listed because the init script names vary by
+# firmware - tools.sh and tools_menu_K1C_2025.sh already probe for both forms.
+CREALITY_SERVICES_NEVER_DISABLE="S55klipper_service CS55klipper_service S56nexusp_service CS56nexusp_service S59quintusp CS59quintusp S60gui_service CS60gui_service"
+
+function disable_creality_services_message(){
+  top_line
+  title 'Disable Creality Stock Services' "${yellow}"
+  inner_line
+  hr
+  echo -e " │ ${cyan}Creality's stock firmware runs background daemons that upload  ${white}│"
+  echo -e " │ ${cyan}configuration and logs to Creality, plus WebRTC daemons that   ${white}│"
+  echo -e " │ ${cyan}go inert once the Built-in Camera Fix takes the camera.        ${white}│"
+  echo -e " │ ${cyan}This disables the non-essential ones. It can be undone.        ${white}│"
+  hr
+  bottom_line
+}
+
+function restore_creality_services_message(){
+  top_line
+  title 'Restore Creality Stock Services' "${yellow}"
+  inner_line
+  hr
+  echo -e " │ ${cyan}This re-enables the Creality stock services turned off by the  ${white}│"
+  echo -e " │ ${cyan}Disable Creality Stock Services option.                        ${white}│"
+  hr
+  bottom_line
+}
+
+function creality_service_disabled_path() {
+  echo "$(dirname "$1")/disabled.$(basename "$1")"
+}
+
+# The always-attempted set. mDNS is deliberately excluded: it is opt-in, so
+# leaving it enabled is the expected outcome and must not read as "not finished".
+function creality_core_services() {
+  echo "$CREALITY_TELEMETRY_SERVICE $CREALITY_CLOUD_WEBRTC_SERVICE $CREALITY_LOCAL_WEBRTC_SERVICE $CREALITY_AI_SERVICE"
+}
+
+# Every service this option is allowed to touch, in rename order.
+function creality_stock_services() {
+  echo "$(creality_core_services) $CREALITY_MDNS_SERVICE"
+}
+
+function creality_services_pending() {
+  local svc
+  for svc in $(creality_stock_services); do
+    if [ -f "$svc" ]; then
+      return 0
+    fi
+  done
+  return 1
+}
+
+function creality_services_disabled_present() {
+  local svc
+  for svc in $(creality_stock_services); do
+    if [ -f "$(creality_service_disabled_path "$svc")" ]; then
+      return 0
+    fi
+  done
+  return 1
+}
+
+# True only when none of the five names exist in either form - i.e. this firmware
+# does not ship the daemons this option knows about. Distinguishes "already done"
+# from "nothing here to do", which look identical from creality_services_pending.
+function creality_services_absent() {
+  if creality_services_pending || creality_services_disabled_present; then
+    return 1
+  fi
+  return 0
+}
+
+# Only the Built-in Camera Fix takes /dev/video0 - files/services/S50builtin_camera-k1c-2025
+# runs mjpg_streamer against it. USB Camera Support deliberately EXCLUDES the built-in
+# device (files/services/S50usb_camera-k1c-2025 filters out $BUILTIN_DEV), so a USB-only
+# install leaves /dev/video0 free and onyxp/thirteenthp/solusp still serve the Creality
+# app camera. Gating on either fix would silently remove a working feature.
+function creality_builtin_camera_fix_installed() {
+  if [ ! -f "$BUILTIN_CAMERA_FILE" ] && [ ! -f "$BUILTIN_CAMERA_LEGACY_FILE" ]; then
+    return 1
+  fi
+  return 0
+}
+
+# 0 = printing or paused, 1 = confirmed idle, 2 = could not be determined.
+# Both ports are consulted and any "printing" wins: helper Moonraker moves to 7126 on
+# this model (moonraker_nginx.sh), while nexusp answers on 7125 whether or not Moonraker
+# is installed. Only an explicitly known idle state counts as idle - anything else falls
+# through to 2 so the caller asks the user rather than assuming the printer is free.
+# jq is not available on the K1_2025 path, so the state is pulled out with sed/grep, and
+# the body is trimmed to the print_stats object first so an unrelated "state" key in
+# nexusp's response cannot be mistaken for the print state.
+function creality_print_in_progress() {
+  local port body state seen_idle
+  seen_idle=""
+  for port in 7126 7125; do
+    body="$("$CURL" -s -m 3 "http://127.0.0.1:${port}/printer/objects/query?print_stats" 2>/dev/null)"
+    case "$body" in
+      *'"print_stats"'*)
+        ;;
+      *)
+        continue;;
+    esac
+    state="$(echo "$body" | sed 's/.*"print_stats"//' | grep -o '"state"[[:space:]]*:[[:space:]]*"[A-Za-z_]*"' | head -n 1 | sed 's/.*"\([A-Za-z_]*\)"$/\1/')"
+    case "$state" in
+      printing|paused)
+        return 0;;
+      standby|complete|completed|cancelled|canceled|error)
+        seen_idle="1";;
+      *)
+        ;;
+    esac
+  done
+  if [ -n "$seen_idle" ]; then
+    return 1
+  fi
+  return 2
+}
+
+# Set by creality_disable_one_service / creality_restore_one_service so the caller can
+# report what actually happened instead of asserting success.
+CREALITY_SERVICES_CHANGED=0
+CREALITY_SERVICES_FAILED=0
+CREALITY_SERVICES_STILL_RUNNING=""
+
+function creality_disable_one_service() {
+  local svc="$1"
+  local proc="$2"
+  local label="$3"
+  local disabled_svc never
+
+  # Enforced, not just documented: adding one of these to a tier above cannot
+  # disable it by accident.
+  for never in $CREALITY_SERVICES_NEVER_DISABLE; do
+    if [ "$(basename "$svc")" = "$never" ]; then
+      error_msg "$never is required by the printer and will not be disabled!"
+      CREALITY_SERVICES_FAILED=$((CREALITY_SERVICES_FAILED + 1))
+      return
+    fi
+  done
+
+  disabled_svc="$(creality_service_disabled_path "$svc")"
+  if [ ! -f "$svc" ]; then
+    if [ -f "$disabled_svc" ]; then
+      echo -e "Info: $label is already disabled, skipping..."
+    else
+      echo -e "Info: $label is not present on this firmware, skipping..."
+    fi
+    return
+  fi
+  if [ -f "$disabled_svc" ]; then
+    echo -e "${yellow}Warning: both $(basename "$svc") and $(basename "$disabled_svc") exist.${white}"
+    echo -e "${yellow}The firmware likely recreated it. Leaving it alone to avoid losing the backup.${white}"
+    CREALITY_SERVICES_FAILED=$((CREALITY_SERVICES_FAILED + 1))
+    return
+  fi
+
+  echo -e "Info: Stopping and disabling $label..."
+  set +e
+  "$svc" stop > /dev/null 2>&1
+  if [ -n "$proc" ]; then
+    killall -q "$proc"
+  fi
+  set -e
+  # Guarded: an unguarded mv would abort the whole helper under set -e (helper.sh
+  # sets it globally and functions.sh run() calls the action as a bare $1), leaving
+  # the daemon stopped but not renamed with no message and no menu to return to.
+  if ! mv "$svc" "$disabled_svc" 2>/dev/null; then
+    error_msg "Could not rename $(basename "$svc") - is $(dirname "$svc") writable?"
+    set +e
+    "$svc" start > /dev/null 2>&1
+    set -e
+    CREALITY_SERVICES_FAILED=$((CREALITY_SERVICES_FAILED + 1))
+    return
+  fi
+  CREALITY_SERVICES_CHANGED=$((CREALITY_SERVICES_CHANGED + 1))
+  if [ -n "$proc" ]; then
+    set +e
+    pidof "$proc" > /dev/null 2>&1
+    if [ "$?" = "0" ]; then
+      CREALITY_SERVICES_STILL_RUNNING="$CREALITY_SERVICES_STILL_RUNNING $proc"
+    fi
+    set -e
+  fi
+}
+
+function creality_restore_one_service() {
+  local svc="$1"
+  local label="$2"
+  local disabled_svc
+
+  disabled_svc="$(creality_service_disabled_path "$svc")"
+  if [ ! -f "$disabled_svc" ]; then
+    echo -e "Info: $label is not disabled, skipping..."
+    return
+  fi
+  if [ -f "$svc" ]; then
+    echo -e "${yellow}Warning: $(basename "$svc") already exists - the firmware recreated it.${white}"
+    echo -e "${yellow}Keeping the newer file; $(basename "$disabled_svc") left in place.${white}"
+    CREALITY_SERVICES_FAILED=$((CREALITY_SERVICES_FAILED + 1))
+    return
+  fi
+  echo -e "Info: Restoring and starting $label..."
+  if ! mv "$disabled_svc" "$svc" 2>/dev/null; then
+    error_msg "Could not restore $(basename "$svc") - is $(dirname "$svc") writable?"
+    CREALITY_SERVICES_FAILED=$((CREALITY_SERVICES_FAILED + 1))
+    return
+  fi
+  CREALITY_SERVICES_CHANGED=$((CREALITY_SERVICES_CHANGED + 1))
+  set +e
+  "$svc" start > /dev/null 2>&1
+  set -e
+}
+
+# Shared by both flows. 0 = safe to continue, 1 = caller should return.
+function creality_confirm_printer_idle() {
+  local print_state confirm
+  set +e
+  creality_print_in_progress
+  print_state=$?
+  set -e
+  if [ "$print_state" -eq 0 ]; then
+    error_msg "A print is in progress, please wait until it is finished!"
+    return 1
+  fi
+  if [ "$print_state" -eq 2 ]; then
+    echo -e " ${yellow}Warning: printer state could not be read on port 7126 or 7125.${white}"
+    echo
+    read -p " ${white}Confirm that no print is running (${yellow}y${white}/${yellow}n${white}): ${yellow}" confirm
+    echo -e "${white}"
+    case "${confirm}" in
+      Y|y)
+        return 0;;
+      *)
+        error_msg "Operation canceled!"
+        return 1;;
+    esac
+  fi
+  return 0
+}
+
+function disable_creality_services(){
+  disable_creality_services_message
+  echo
+  echo -e " ${yellow}Warning: these services live on a partition that survives a factory"
+  echo -e " reset, so a reset will not bring them back. Use Restore Creality Stock"
+  echo -e " Services to undo this.${white}"
+  echo
+  local yn mdns_yn camera_fix
+  while true; do
+    disable_msg "Creality Stock Services" yn
+    case "${yn}" in
+      Y|y)
+        echo -e "${white}"
+        if ! creality_confirm_printer_idle; then
+          return
+        fi
+
+        # Every decision is collected BEFORE the first rename, so an abandoned
+        # prompt cannot leave the printer half-disabled, and the idle check below
+        # cannot go stale while the user reads a question.
+        camera_fix="no"
+        if creality_builtin_camera_fix_installed; then
+          camera_fix="yes"
+        else
+          echo -e "${yellow}Warning: the Built-in Camera Fix is not installed, so onyxp, thirteenthp${white}"
+          echo -e "${yellow}and solusp are left running - they still serve the Creality app camera,${white}"
+          echo -e "${yellow}local WebRTC and AI detection while /dev/video0 is free.${white}"
+          echo -e "${yellow}(USB Camera Support does not take the built-in camera, so it does not${white}"
+          echo -e "${yellow}count here.)${white}"
+          echo
+        fi
+        mdns_yn="n"
+        if [ -f "$CREALITY_MDNS_SERVICE" ]; then
+          echo -e " ${yellow}Disabling mDNS also stops <hostname>.local resolution and Creality"
+          echo -e " Print / app discovery on the local network.${white}"
+          echo
+          read -p " ${white}Also disable ${green}mDNS advertising ${white}? (${yellow}y${white}/${yellow}n${white}): ${yellow}" mdns_yn
+          echo -e "${white}"
+        fi
+
+        # Re-check immediately before mutating: the prompts above may have taken a while.
+        if ! creality_confirm_printer_idle; then
+          return
+        fi
+
+        CREALITY_SERVICES_CHANGED=0
+        CREALITY_SERVICES_FAILED=0
+        CREALITY_SERVICES_STILL_RUNNING=""
+        creality_disable_one_service "$CREALITY_TELEMETRY_SERVICE" "alchemistp" "Creality telemetry agent (alchemistp)"
+        if [ "$camera_fix" = "yes" ]; then
+          creality_disable_one_service "$CREALITY_CLOUD_WEBRTC_SERVICE" "onyxp" "Creality cloud WebRTC signalling (onyxp)"
+          creality_disable_one_service "$CREALITY_LOCAL_WEBRTC_SERVICE" "thirteenthp" "Creality local WebRTC media server (thirteenthp)"
+          creality_disable_one_service "$CREALITY_AI_SERVICE" "solusp" "Creality AI failure detection (solusp)"
+        fi
+        case "${mdns_yn}" in
+          Y|y)
+            creality_disable_one_service "$CREALITY_MDNS_SERVICE" "mdns" "Creality mDNS advertising (mdns)";;
+          *)
+            if [ -f "$CREALITY_MDNS_SERVICE" ]; then
+              echo -e "Info: Leaving mDNS advertising enabled..."
+            fi;;
+        esac
+
+        if [ "$CREALITY_SERVICES_CHANGED" -eq 0 ]; then
+          error_msg "No Creality stock services were disabled!"
+          if [ "$CREALITY_SERVICES_FAILED" -gt 0 ]; then
+            echo -e " ${darkred}$CREALITY_SERVICES_FAILED service(s) could not be disabled - see the messages above.${white}"
+          else
+            echo -e " ${darkred}None of the expected service files were found on this firmware.${white}"
+          fi
+          echo
+          return
+        fi
+        ok_msg "$CREALITY_SERVICES_CHANGED Creality stock service(s) have been disabled successfully!"
+        if [ "$CREALITY_SERVICES_FAILED" -gt 0 ]; then
+          echo -e "   ${yellow}$CREALITY_SERVICES_FAILED service(s) were skipped - see the messages above.${white}"
+        fi
+        if [ -n "$CREALITY_SERVICES_STILL_RUNNING" ]; then
+          echo -e "   ${yellow}Still running:$CREALITY_SERVICES_STILL_RUNNING - please reboot to stop them.${white}"
+        else
+          echo -e "   ${cyan}The services were stopped, so no reboot is needed.${white}"
+        fi
+        echo -e "   ${cyan}The change persists across reboots and factory resets until restored.${white}"
+        return;;
+      N|n)
+        error_msg "Disabling canceled!"
+        return;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+}
+
+function restore_creality_services(){
+  restore_creality_services_message
+  local yn
+  while true; do
+    restore_msg "Creality Stock Services" yn
+    case "${yn}" in
+      Y|y)
+        echo -e "${white}"
+        # Restoring restarts onyxp/thirteenthp/solusp, which compete for /dev/video0
+        # with the Built-in Camera Fix, so this path needs the same idle check as disable.
+        if ! creality_confirm_printer_idle; then
+          return
+        fi
+        if creality_builtin_camera_fix_installed; then
+          echo -e "${yellow}Warning: the Built-in Camera Fix is installed. Restoring these services${white}"
+          echo -e "${yellow}puts them back in contention for the camera - restart the camera or${white}"
+          echo -e "${yellow}reboot if the stream misbehaves afterwards.${white}"
+          echo
+        fi
+        CREALITY_SERVICES_CHANGED=0
+        CREALITY_SERVICES_FAILED=0
+        creality_restore_one_service "$CREALITY_TELEMETRY_SERVICE" "Creality telemetry agent (alchemistp)"
+        creality_restore_one_service "$CREALITY_CLOUD_WEBRTC_SERVICE" "Creality cloud WebRTC signalling (onyxp)"
+        creality_restore_one_service "$CREALITY_LOCAL_WEBRTC_SERVICE" "Creality local WebRTC media server (thirteenthp)"
+        creality_restore_one_service "$CREALITY_AI_SERVICE" "Creality AI failure detection (solusp)"
+        creality_restore_one_service "$CREALITY_MDNS_SERVICE" "Creality mDNS advertising (mdns)"
+        if [ "$CREALITY_SERVICES_CHANGED" -eq 0 ]; then
+          error_msg "No Creality stock services were restored!"
+          echo
+          return
+        fi
+        ok_msg "$CREALITY_SERVICES_CHANGED Creality stock service(s) have been restored successfully!"
+        if [ "$CREALITY_SERVICES_FAILED" -gt 0 ]; then
+          echo -e "   ${yellow}$CREALITY_SERVICES_FAILED service(s) were skipped - see the messages above.${white}"
+        fi
+        return;;
+      N|n)
+        error_msg "Restoration canceled!"
+        return;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+}
diff --git a/scripts/menu/K1_2025/customize_menu_K1C_2025.sh b/scripts/menu/K1_2025/customize_menu_K1C_2025.sh
index 83e7601..577637a 100755
--- a/scripts/menu/K1_2025/customize_menu_K1C_2025.sh
+++ b/scripts/menu/K1_2025/customize_menu_K1C_2025.sh
@@ -9,6 +9,9 @@ function customize_menu_ui_k1_2025() {
   hr
   menu_option '1' 'Install' 'Creality Dynamic Logos for Fluidd'
   hr
+  menu_option '2' 'Disable' 'Creality Stock Services'
+  menu_option '3' 'Restore' 'Creality Stock Services'
+  hr
   inner_line
   hr
   bottom_menu_option 'b' 'Back to [Main Menu]' "${yellow}"
@@ -33,6 +36,22 @@ function customize_menu_k1_2025() {
         else
           run "install_creality_dynamic_logos" "customize_menu_ui_k1_2025"
         fi;;
+      2)
+        if creality_services_absent; then
+          error_msg "No Creality stock services were found on this firmware!"
+        elif ! creality_services_pending; then
+          error_msg "Creality Stock Services are already disabled!"
+        else
+          run "disable_creality_services" "customize_menu_ui_k1_2025"
+        fi;;
+      3)
+        if creality_services_absent; then
+          error_msg "No Creality stock services were found on this firmware!"
+        elif ! creality_services_disabled_present; then
+          error_msg "Creality Stock Services are not disabled!"
+        else
+          run "restore_creality_services" "customize_menu_ui_k1_2025"
+        fi;;
       B|b)
         clear; main_menu; break;;
       Q|q)
diff --git a/scripts/menu/K1_2025/info_menu_K1C_2025.sh b/scripts/menu/K1_2025/info_menu_K1C_2025.sh
index aee1326..2955beb 100755
--- a/scripts/menu/K1_2025/info_menu_K1C_2025.sh
+++ b/scripts/menu/K1_2025/info_menu_K1C_2025.sh
@@ -41,6 +41,28 @@ function check_simplyprint_k1_2025() {
   fi
 }
 
+# Tri-state: the camera gate makes a partial disable a normal outcome, so a plain
+# tick would report a half-done state as finished. mDNS is opt-in and excluded.
+function check_creality_services_k1_2025() {
+  local svc any_disabled any_enabled
+  any_disabled=""
+  any_enabled=""
+  for svc in $(creality_core_services); do
+    if [ -f "$(creality_service_disabled_path "$svc")" ]; then
+      any_disabled="1"
+    elif [ -f "$svc" ]; then
+      any_enabled="1"
+    fi
+  done
+  if [ -z "$any_disabled" ]; then
+    echo -e "${red}✗"
+  elif [ -n "$any_enabled" ]; then
+    echo -e "${yellow}~"
+  else
+    echo -e "${green}✓"
+  fi
+}
+
 function info_menu_ui_k1_2025() {
   top_line
   title '[ INFORMATION MENU ]' "${yellow}"
@@ -84,6 +106,7 @@ function info_menu_ui_k1_2025() {
   hr
   subtitle '•CUSTOMIZATION:'
   info_line "$(check_file_k1_2025 "$FLUIDD_LOGO_FILE")" 'Creality Dynamic Logos for Fluidd'
+  info_line "$(check_creality_services_k1_2025)" 'Creality Stock Services Disabled'
   hr
   inner_line
   hr
diff --git a/scripts/menu/functions.sh b/scripts/menu/functions.sh
index 556f8ee..3644b49 100755
--- a/scripts/menu/functions.sh
+++ b/scripts/menu/functions.sh
@@ -109,6 +109,10 @@ function remove_msg() {
   read -p "${white} Are you sure you want to remove ${green}${1} ${white}? (${yellow}y${white}/${yellow}n${white}): ${yellow}" $2
 }
 
+function disable_msg() {
+  read -p "${white} Are you sure you want to disable ${green}${1} ${white}? (${yellow}y${white}/${yellow}n${white}): ${yellow}" $2
+}
+
 function restore_msg() {
   read -p "${white} Are you sure you want to restore ${green}${1} ${white}? (${yellow}y${white}/${yellow}n${white}): ${yellow}" $2
 }
diff --git a/scripts/paths.sh b/scripts/paths.sh
index 06060df..3748b57 100755
--- a/scripts/paths.sh
+++ b/scripts/paths.sh
@@ -201,6 +201,15 @@ function set_paths() {
   
   # Creality Web Interface #
   CREALITY_WEB_FILE="${BIN_FOLDER}/web-server"
+
+  # Creality Stock Services (K1C 2025) #
+  # INITD_FOLDER is already model-branched above; these files only exist on the
+  # K1_2025, and the option using them is only reachable from its Customize menu.
+  CREALITY_TELEMETRY_SERVICE="${INITD_FOLDER}/CS61alchemistp_service"
+  CREALITY_CLOUD_WEBRTC_SERVICE="${INITD_FOLDER}/CS58onyxp_service"
+  CREALITY_LOCAL_WEBRTC_SERVICE="${INITD_FOLDER}/CS59thirteenthp"
+  CREALITY_AI_SERVICE="${INITD_FOLDER}/CS57solusp_service"
+  CREALITY_MDNS_SERVICE="${INITD_FOLDER}/CS99mdns"
   
   # Guppy Screen #
   GUPPY_SCREEN_FOLDER="${USR_DATA}/guppyscreen"